bolt size

Hey y'all, The cover to hold the sway bar bushing has fallen off. Sway bar makes a hell of a noise (bushing slides to the left on its own) when it hits the axle!! geeeeezus. Sound happened near home, so gonna take a walk and see if i can find it hahaha. Anyways, so i think i have found the...

So I searched and could not find this information. This is for a 1fz fe, I had a crank that had some rust on the inside threads and the M22 bolt would not thread in more than a couple turns before binding up. So I grabbed a tap and cleaned them out. For future mud members the bolt is a M22x1.5...

I managed to strip a grab handle bolt while troubleshooting a clogged sunroof drain tube. Anyone know the bolt size? I can always stare and compare or dive deep into the Partsouq bowels, but figured I'd ask just in case. :)

Hi all, Just got a GX470 and noticed that one of the rear spoiler mounting bolts is missing. Does anyone happen to know the bolt size? It's the spoiler from factory. Thanks

Lost the bolts that hold the front splash shield(under radiator) on an LX450 and wanted to know if this is the correct one. Does it only take one size or two? There are more than one listed holding that splash shield.

Does anyone know what the bolt size and thread pitch for linking the factory 2F exhaust manifold to the initial exhaust line flange? If anyone has the Toyota Part#, please share! Thanks!!

Any help is appreciated! Thanks! *1998 Toyota Land Cruiser 4.7L 100 series*

What is the exhaust manifold to down pipe flange bolt size and thread pitch on a 1979 fj40? TIA.

Hey everyone, I snapped this bolt the other day and need to order a new one. I am looking for the part number for it. It goes in the hole that is circled and is a 14mm flange nut. This is for one of the idler pulleys. Pretty sure it’s the ac pulley but not 100% TIA

Hello and thanks in advance for any advice. I recently purchased my brother 40 and it needs some bolts that are missing from the axle cap. Curious if anyone can point me in the direction of replacements or alternatives. Ben

Seems like some bolts thread into the rain gutter and some use nuts. Mine were all rusty and mismatched. What sizes and thread pitches should these be? Also, how do I remove the blue painted pieces from the old top in pic #2? Attached some pics of my progress just for fun ;) thanks!

Greetings all, In short I would like to know the size of the bolt and nut that ties the fluid line to the bracket on top of the shock ( see attachment marked in blue) I have recently bought an lc100 VXR (VXR is the top trim level here in GCC ) with AHC system, The shocks failed when the...

Bought an ARB Bumper a while back, took it off to install a winch, and lost 2 of the 4 bolts for the front recovery points. Looked all over the shop and couldn't seem to find them, they must have ended up in the trash. Went to some local hardware stores to try to find bolts for them, I wasn't...

Hi. Does anyone have the bolt sizes for the oil pan and side cover bolts? Also looking for those three bolts that hold the steering column to the firewall. Thank you.