Hi all. I have a 12V superglow system on my HJ47 (2H). Have read a number of posts and was not able to find the answer I need.
After noticing that starting was getting difficult I took a look at the connections. I noticed that one of the connectors between the two resistors was broken. I have...
Whistle and Soot dealer for the USA and Canada.
Have some of their parts now listed on my site: www.legendarytoyota4x4s.com
Will be adding alot more in the near future. Have questions, need help with a setup. Just ask!
I have a 1989 hj75 2h and I’m trying to order some new glowplugs but every site only has ip to 1988 and I’m not sure why, and anybody know the voltage that my glowplugs would run because there is heaps of differnt options! Cheers
I'm seriously considering fitting an oil centrifuge to the 1HZ engine in my 80 series:
https://www.scintex.com.au/products/oil-centrifuge
This is something Toyota themselves had standard on the Landcruiser in times gone by, on some years of the 2H engine...
Got me a running engine for my truck ... but the block is pretty crusty ... just wanted to make sure before going too far on the rebuild that there is no oil gallery on the exhaust side of the block where circled , picture is not mine
Is your 2H struggling to start or blowing a lot of smoke in the mornings? Is your glow plugs not glowing long enough?
Then it's most likely your glow plug controller!
Luckily, they are available right now!
Product description
Our 12V Glow Plug Preheater boards (commonly known as Glow Plug...
Is your 2H or 3B engine having issues starting or stopping? Is your EDIC motor acting up?
Then the problem most likely lies with your Fuel Control Relay.
Lucky for you, they are available right now brand new!
Product description
Our 12V or 24V Fuel Controller Relay boards have higher...
Recon 2H head for sale, parting out my engine from my HJ47. will post more parts as I take them off, (ip,lines,injectors, cranckshaft,etc.)
Located in San Diego Ca, ship on your dime, heavy.
$500.00
Hey, my 105 1hz makes a burr noise when engage to 4H. working fine in 2H. The burr sound is audible in 3rd gear if i drive faster the sound goes away.
what does this sound mean? i changed the oils 5months ago,
Hey guys, currently restoring a 1981 hj47 and I’ve been chasing a little engine drama for awhile and can’t quite seem to fix it. The Ute I bought has had a couple restore attempts so not sure what’s been done engine wise, it’s blowing a decent amount of white smoke on acceleration and a small...
Recently bought a 1985 HJ60 running the 2h engine and the coolant reservoir tank is consistently overfull and does not drain back into the radiator.
My engine temps haven't run high and there are no visible leaks, although I have only taken the truck on relatively short trips (5-15 mins). The...
Now selling the 24V LandCruiser EDIC controller boards with a brand new factory plug!
These boards have a higher corrosion-resistance than OEM boards, meaning they’re perfect for reviving your rig.
Now coming with the factory plug installed means they are plug and play.
Each board is $200 or...
Now selling LandCruiser EDIC controller boards with a brand new factory plug!
These boards have a higher corrosion-resistance than OEM boards, meaning they’re perfect for reviving your rig.
Now coming with the factory plug installed means they are plug and play.
Each board is $200 or $250...
Looking for the following for my 1989 Troopy 2H.
- 2H oil pan gasket
- 2H fuel filter housing gasket
- LH side rear lense cover
- Pair of turn signal lense covers
- Side window metal frames for all 4 windows or gullwing windows.
Hi guys putting a internal regulator alternator in my hj60 i know what wires go to the alternator from the regulator plug but is this the right way to bridge the rest of the terminals on the plug