1993

Good evening, im having some issues with my 80 series that I just can't figure out. This is a 1993 80 series from Japan with the 1fz-fe and 175k miles. The issue: Slow and lagging acceleration, bouncing rpms at idle in drive, jumping throttle when trying to accelerate at a faster speed. parts...

imported 80 series beach day

Good afternoon! I own a 1993 80 series from Japan and had a few questions! 1FZ-FE with 290,000 KM A little background, I'm 21 and have owned this cruiser for about 5 months and recently drove it 3,000 miles from Colorado to Ohio down to Florida. zero issues on the drive not even a fluid top...

I have a 1993 HZJ80 and the front left power window and left wing mirror are not working. Are they likely connected and where should I start looking for the problem? Thanks for any help.

ISO part numbers: 89465-69065 89465-69075 Or compatible O2 sensors for 1993 80 series. Looks like my only options are Walker or maybe Bosch, if anyone has any insight on those please share. Thanks

I have a 1993 80 series. Looking for O2 sensors. All the past treads have part numbers that are either both current or discontinued. Does anyone have updated parts numbers?

Hi all, as the title suggests, I'm after a wiring diagram for Australian delivered FZJ80R's. Specs on my 80 are as follows; 1993 1FZFE GXL Manual Right Hand Drive Australian Delivered (99% sure of this) Pre catalytic converter oxygen 02 sensor No EGR I am currently diagnosing an issue with...

Hi all, as the title suggests, I'm after a wiring diagram for Australian delivered FZJ80R's. Specs on my 80 are as follows; 1993 1FZFE GXL Manual Right Hand Drive Australian Delivered (99% sure of this) Pre catalytic converter oxygen 02 sensor No EGR I am currently diagnosing an issue with...

I have a problem and I’m not afraid to admit it. This is the fifth Land Cruiser I’ve bought. 2002, 2011, 2005, 1994 and now a 1993. But this one (1993) is more special than the others. I’ve been searching for another 80 series to work on since I finished up the mechanical baseline on my 1994...

Hi all, Thought I'd share another of my Cruisers. This time my 1993 KZJ78W, in blue, with super low kms. It's INCREDIBLY clean. Paint is great, interior is spotless, and drives beautifully. I was so fortunate with this one. A guy listed on Marketplace and didn't really know too much about it...

Anyone have a functioning ECM P/N 89661-60221, for a 1993 FZJ80? I'm located in SoCal.

Looking for an ECM for my 1993 80 series. Let me know What you got. shipped to 98281

EDIT: The circuit boards for the TCM’s on both the original and the one I swapped in were messed up in different areas. My buddy with a 93 came over and we swapped his TCM in and it fixed my issues. I bought a 93 FZJ80 equipped with a A442F transmission the other week. The truck had been...

Hello all, I am searching for a thread or some insights on attaching a kick down cable. I have recently did a transmission swap, but a lost on how to connect the kick down cable properly. Thanks in advance

https://seattle.craigslist.org/see/cto/d/seattle-1993-land-cruiser-lj77-lx-door/7706321240.html Not mine.

I purchased a 1993 Land Cruiser several years ago. It ran great for a couple of years. I started having issues with a rich code and problems with the distributor. About 6 months ago it wouldn't start so I parked it. I recently decided to work on it again, had a mechanic look at it who replaced...

I am selling my LS3 swapped 1993 Land Cruiser. This is a great working rig I bought a couple years ago in Texas wheeled it for the weekend and drove it home 17 Hours to Colorado. It's served me well and is really is fun to drive. The previous owner did the swap. This could be a daily driver it...

Hey guys My 80 is in the shop with a cyl 6 misfire. They confirmed fuel injector is stuck open. Are there any compatible fuel injectors that are readily available? Don't really have the time to send for rebuild as it's my daily. Time is most important factor. Cheers

its really looking like ill need to take the steering shaft out because going down means front cv shaft out out.

Hi all! Just joined the forum in search of help. I noticed white smoke upon start and it seems to be getting worse. After noticing the smoke I noticed the fuel injector pump has a leak so I'm guessing the two are related. My local mechanic believes he can fix the pump by recalibrating it, is...