Hi everyone, I have a 1988 HJ61, and my 12HT when driving along and putting the clutch in at around 2000-3000 rpm drops right down to 400/450rpm and nearly stalls out.
A few times it actually has stalled out especially coming down a hill and pushing the clutch in, also nearly dies when...
Wanted to puchase- the Toyota Land Cruiser HJ61 12HT crossover pipe- the top one with "Toyota" marked on it. Please and thank you to anyone who has one they can depart with. Part# 17113-68010
I drive an 87 JDM HJ61 with the 12HT/H55F, and unfortunately my transmission just up and died out of nowhere, so I'm replacing it with a new unit, and obviously will drop a new clutch in as well while I'm in there. My question is, would the standard or heavy duty clutch be a better choice...
So unfortunately I have the bad news that my 12ht has no oil pressure. Looking for leads on a replacement 12ht motor either stateside or in Japan.
If anyone has one please send me a DM so I can get this thing back on the road. Located in Salt Lake City Utah.
I have a 1987 JDM HJ-61 with the 12H-T, 263,000 km on the odometer with zero previous transmission issues, and all of the sudden, I'm having a terrible whining/grinding noise coming from my transmission, an H55f-K052, which the search feature on MUD tells me means I have a 37 ring : 10 pinion...
Chasing a charging gremlin in a 89' HJ61 12HT (12V aussie model).
Back story:
Standard alt died 18 months ago, fitted a new 80A internal reg alt and it run without issues until a week ago. Charge & filter lights remained constant and not producing any charge. I already run a thicker gauge...
Hey there,
I'm searching for a high mileage / blown 12h-t to rebuild. Long block is fine.
If you know of one or have one to sell, please let me know.
Thanks!
-Ophir
selling my daily driver hj61 as i am needing a pickup truck (open to outright trade for 4x4 truck)
the good-
engine runs strong, drove it cross country with no issues 3 times in the last three years
frame is solid!
had the front axle professionally rebuilt 1 year ago.
had any body rust cut out...
Say you own 3 trucks:
85 FJ60 with H55F mated to a 2F
88HJ60 (super clean body) with Hydraulic A440 mated to 2H
89HJ61 with Hydraulic A440 mated to 12HT
Are all these Transmissions/ engines interchangeable without different bellhousings or any major parts or mount fabrications??
would like to...
Selling a CT26 turbo out of my hj61. Replaced due to a noise. Pretty sure due to a bad gasket between exhaust and downpipe but the turbo could probably use a rebuild. Asking $375 obo. Not looking to ship but buyer pays shipping. Has 120k miles on it.
Hi all,
I'm looking to do a partial rebuild (pistons only) of my 12ht 390k with suspected blow by. After researching the wear and tear of worn pistons and rings and potential damage caused, it seems Alfin insert pistons are the way to make the most impact to durability and may be possible for a...
HJ61 with H55F and 12HT - Runs and Drives and has windows - $19000
The Good
-AC Blows Cold
-Transmission and transferase rebuilt. (Kit from Cruiser Outfitters)
-New Aisin Clutch
-Front knuckle rebuild (SOR)
-OME heavy plus suspension with greaseable shackles, F/R sway-bar links, and steering...
Well, I have owned this 1985 HJ75 for just about a year and have started the process of building it into a functional, durable, and liveable vehicle. Before dropping the cash on the build-out, I wanted a thorough understanding of the vehicle dynamics and my interaction with it, thus, the...
Currently in the process of planting my 12ht from an 1988 HJ61 into a 1988 HJ60 Chassis that had a 2H in it.
The mounts on the engine block are at a far steeper angle to the mounts located on the chassis. They line up okay, but when we tighten them down they stretch the rubber mounts out... the...
G'day everyone what is a suitable coolant temp for the 12ht. I have fitted a redarc temp gauge into the top of the thermostat housing. On a 40° day doing between 100 and 110kmh the gauge sits on 95° to 100° when driving around town on any other day it sits on 90° with aircon on or off. Also run...
G'day all
New to the site - first post
Currently rebuilding my 12HT from my HJ61 and have run into an issue with the oil squirters, in particular the dowels that align them.
Somehow from the process of strip down at home to packing everything to the machine shop, and back home again, I've...