Post up pics of your driving light setup!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

FineWynsFJ40

Too much to do...
Joined
Jan 13, 2005
Threads
84
Messages
1,377
Location
Grand Haven, MI
I'm evaluating how/where to mount some fog/driving lights. I'm thinking behind the bumper, fabricating a bridge from frame rail to frame rail behind the tow hooks to mount them, or possibly just under the first frame cross member so they won't get ripped off by branches/trees/pedestrians :whoops: that I mow down... I'd appreciate any suggestions on the kind to get, and where you got them. Keep in mind, I'm finishing up the restoration and in college, so money isn't too loose but it'd be nice to actually see where I'm going down trails and roads at dusk/dawn and at night. Thanks!!
 
here you go. mine are off the bumper, set back and I used some $3-5 brackets from the housing/wood department at Home Depot, cut them to length, drilled holes, mounted.

wantatlc1.jpg
 
The brackets from Home Depot sound like a very good idea... What kind of driving/fog lights do you recommend? I'm looking under $60 or so, thanks!
 
For that price I would look into Hella 500's. They are a good driving light, but are not that great on the trail as they shoot light WAY down the trail instead of flooding it in front of you.

Good lights though, you can find them almost anywhere.

Rezarf <><
 
I made mine from channel steel (fits pretty well on the bumper mountings with a short piece if pipe as a shim), 4" black pipe, 1" steel tubing, some plate steel, angle iron, and a case of beer (for the person who welded it for me).

Lights are Bosch 80mm (from Mofoco, that's the only place I've seen them), and a set of HID fog lights that I made from Ford Explorer housings I think. Bosch lights are pencil beam, fogs are angled out to spread a wide beam pattern.
Land Cruiser brush guard.webp
BG3.webp
 
Thanks for the pics and ideas, all very helpful. Those little thin Hella fog lights, how much light do they throw out? Are they worth installing, because I might put them below and behind the bumper and driving lights above and behind the bumper. I'm liking the bracket idea from Wantatlc. I have some NAPA driving/fog lights on my Buick and I love the amount of light they put out (55 watts) both down the line, right in front of me, and peripheral. Much obliged, gentlemen, I owe you some :beer: :beer:

:cheers:
 
funny thing about those brackets - not even sure what they are called or for - is that they already came in black and they are super stiff and firm. I will post up a picture of the mount. each mount is about 6-8" long and has holes about every inch (I think that it is used for wall supporting) and it looks like a series of octagons. hard to explain (photo will help), but in the end I was able to cut off about the last 3-4 inches and mount them into existing holes on the bumper and since they had holes in them, the lights fit right in. even allows for the swivel of the lights. if I recall, I was able to use 1 mount to do both lights.

I set them back just enough to not hit the brush guard (which had tabs for the lights - but the lights were to big to fit in the space).

BTW, my brand of light is the Pro Comp Discovery. Middle of the road I think, in your price range for sure, but for as little as I use them, seem pretty nice and have been around a while.

light_mount.jpg
 
Last edited:
I choosed this setup for the lights.

blinkev6ri.jpg


Hella Micro FF Lights and Hella Indicators

petersadtlerthenisseykid1df.jpg
 
I made some brackets out of 1/4 x 1 bar stock and bolted to the top of the tow hooks. Looks something like this


LIght____
\______hook
 
Last edited:
is that some kind of jery rigged LC emblem on the bezel :)

anway, that is a good idea for mounts. not seen that.
 
Hey finewynsfj40, flip your bezel on your avatar ...... sorry I could not resist
 
It's a side emblem off a 60, someday I'll buy the reproduction pressed landcruiser
 
I went to H4 bulbs with a 100W high and 55w low - no need for other lights now.

I was able to pick up some Hell aux lights from www.SPAM website for super cheap. I though they were just a simple work light but they have H4 hi-lo bulbs and throw a decent amount of light. Now I have hi/lo beam backup lights :D

I guess it's too late but that site has some smokin deals from time to time.
 
Back
Top Bottom