Recent content by daytonadogie

  1. daytonadogie

    Any cheap Amazon/Ebay radiators you'd recommend.

    I’d be interested in seeing photos of some failures if anyone has one
  2. daytonadogie

    Any cheap Amazon/Ebay radiators you'd recommend.

    I’ve used Chinese 4 row radiators on all 3 of my LS swaps with no issues whatsoever. I’ve used eBay and Amazon and can’t tell the difference. The mounting holes were a little off on one, a rat tail file took care of that. Having said that, if you’re a “Made In China” phobe, go OEM. I’d...
  3. daytonadogie

    5.3/6L80 VS 6.0/4L80 for those that have done it. questions

    I currently have 2 FZJ 80’s, one with a ‘03 5.3, the other with a ‘04 6.0. Both engines are bone stock. Definitely go with the 6.0, way more fun to drive. Can’t comment on the tranny’s, I used 4L60E’s on both swaps.
  4. daytonadogie

    Registry 8x Series V8 Swaps

    I was taught eons ago to add enough Freon till the sight glass cleared up, after evacuating the system . That resulted in using around 2 small cans of refrigerant, either R12 or 134, on all three Cruisers that I’ve swapped. More is not better when it comes to AC units..
  5. daytonadogie

    Registry 8x Series V8 Swaps

    You’ve got two cylinder heads, so put the LS sensor in one side and the LC sensor in the other. I’m running a third sensor for an aftermarket temp gauge since the stock one is kind of worthless. Drilled and tapped into the water pump for that one.
  6. daytonadogie

    Exhaust estimate in Colorado

    I’ve ordered cats online and they wouldn’t sell/ship them to Colorado unless they were CARB certified, costing hundreds more. Ended up mailing them to my daughter in OR then shipped them to me . I don’t believe there is any difference between the certified and non certified cats for the same...
  7. daytonadogie

    Registry 8x Series V8 Swaps

    Me too. When it gets real cold I’ll duct tape some cardboard or foil over the cooler. Looks real high tech!
  8. daytonadogie

    Registry 8x Series V8 Swaps

    I installed a water temperature gauge in the console area you described and had to use a 1 1/2 “ Equus unit. I still have the 2” Autometer gauge that was too big. I don’t think there is enough room for a 2” gauge in that area. Also, there is a bracket behind there that limits the length of...
  9. daytonadogie

    Best Strong Phone Dash Mount in 2025?

    Looks like you have a ‘96 Cruiser. I use something similar to this. https://www.etsy.com/listing/1665042575/land-cruiser-dash-accessory-mount-v2-95?ls=a&external=1&rec_type=ad&ref=pla_similar_listing_top-3&sts=1&plkey=LTc9e3979f14a9bfc31d15800437e44221ba312bf9%3A1665042575...
  10. daytonadogie

    Registry 8x Series V8 Swaps

    The basic Saginaw PS pump that we’re using with most LS swaps has been around for eons, way before specific PS fluid ever existed. I don’t think we need to worry about using ATF it . Best pump ever made!
  11. daytonadogie

    Stuck rod bearing cap

    They should come off without much pursuasion. Maybe a few gental taps with a brass hammer would help.
  12. daytonadogie

    80-Series won’t track straight

    My latest 80 was all over the road till I tightened up the steering box. Do you have much slop in the steering wheel turning left to right? You should only have to back off the adjustment screw about 1/2 turn after bottoming it out.
  13. daytonadogie

    Registry 8x Series V8 Swaps

    Delete
Back
Top Bottom