Recent content by chengitis

Anyone have an EWD for an 07. I pulled the same connector as CO_HUNTER but the green/white wire is not in pin 7 but pin 8. Not sure if I should be tapping into pin 7 or pin 8

@CO_Hunter my 07 470 pin 7 is a different color wire. The green/white wire on your pin 7 is pin 8 (I think) on my connector. Should I tap into pin 7 or follow the green/white wire?

I had it on both vehicles and sits pretty flush with only 1” gap between RTT and rack. I actually had 270° awning on driver side and shower tent on passenger side on the lexus.

Alu-Cab Gen 3.0 Expedition Roof Top Tent Price: $3,500 Selling a used very good condition silver Alu-Cab Gen3.0 expedition roof top tent with low profile load bars to mount stuff on and still be able to open the tent and telescoping ladder. No fading on the liners. Took very good care of this...

I’m selling my 3.0 if anyone is interested. Located in NorCal Bay Area. DM me for details.

DM sent

I have my ABS, VSC and trac lights on due to a faulty front left wheel speed sensor. I replaced it and used the techstream to clear the lights but the lights are still lit when I turn the car on. Also the codes are still visible on techstream. Is there something I am missing here?

Yes I did order and installed the part. I did have to drill an additional hole

Doing a little more research and found this edit: did a little more homework and looks like the lc200 is the better uograde https://www.fjcruiserforums.com/threads/lc200-steering-rack-diy-install-guide.748327/

Can anyone confirm if a GX460 or 5th gen 4runner steering rack and pinion is interchangeable with GX470?

Count me in

@Jstawgn did you ever get this dialed in? I can’t seem to get negative camber with SPC maxed out. I’m at setting G with offset bushing rear push out and front pull in or neutral.

what brand paint and paint code did you use?

Did you mean the hinges?

Anyone upgrade the coastal swing out hinge to 4x innovations? Is it worth upgrading or the coastal hinge is sufficient?