Pair of driveshafts from a ‘79 (4-speed) FJ55 for sale. Shafts are in good condition, just didn’t need them for my FJ40.
Located in Roxboro, NC 27574
$100 for the pair
May 1971 fj55 roller frame, I don't see any holes from rust anywhere. I don't have any intentions to ever build a 55. I can help load on a trailer as well
I have 3 (2 1/2) J55 Cruisers I would like to sell as a lot. I had begun to restore the 73 (on the right) as a 4 speed, ('74 Transmission, Transfer case) but I have had some change in plans. I...
Decent FJ55 got from a guy who got it from original owner , engine is incredibly tight and healthy , runs great , shifts great 4x4 works. No leaks really, could be driven around town as is , body...
Speedometer clusters $50 a piece. Rear heater $60. Miscellaneous hinges $60. Vent $20. All items are plus shipping. If we were to bundle price. $150 plus shipping
1974 iron pig with title , part out , floor pans in using . Rockers are toast, good diffs , good fuel tank , some good body panels PM what you may need .
This FJ55 has some updates, along with a lot of stock items remaining. A 2” OME lift kit was installed, and most of the smog/old carburetor were pulled. Those parts are still in hand and will go...
Reviving this ad as the original was archived.
PO removed my fuel return line and installed an aftermarket carb. Going back original and need a return fuel line to either use or at least to use...
SOLD
1976 FJ55. Fully rebuilt body about 20 years ago. New steel on a rust free frame. Recently had a full $15,000 paint job. Currently rust free.
New window and door gaskets. New old stock OEM...
Bolt together roll cage. Your piggy needs this. $200.
It’s outside of Seattle. But I can get it down to the Bay Area in a couple of days or in a few weeks, or meet up along the way between...
This is a complete 1979 FJ55 frame for your Pig.
VIN: FJ55-101184 - this corresponds to a late January 1979 build according to the SOR VIN decoder.
This is a nice frame - straight with very...
1973 rolling chassis. Complete drivetrain. Engine spins. Everything spins. That’s all I know about it. Don’t really want to make it a non roller at this point, so not pulling much off it...
Is there any source for new rocker panels and other body sheet metal? I’ve just acquired a 55 and am starting to realize parts are a little more scarce than for my 40.