red66toy
Supporting Vendor
Hey everyone! A introduction for our small enterprise. We have mainly been on instagram but are all LOOOOONG time Mud members. We are a group of like minded cruiser-heads who wanted to come together and not only share our love for these amazing vehicles but develop some cool products for them as well. Check out our IG account @the_cruiser_cult (The Cruiser Cult) and www.cruisercult.com for more info on us and what we have been up to! Lots of great content from historical facts, literature, interviews with experts in the cruiser world and our own generated content.
The Cruiser Cult is excited to release our first product. Adaptive light brackets for solid axle Land Cruisers! These awesome little brackets allow you to mount small powerful lights to the knuckles of your cruiser giving you directional light where you need it the most! These were designed to mount on the 40,60,70,80 series (pics show them on a FJ62 and FZJ80) and likely and 1979-1986 Toyota trucks. They come pre-bent, unpainted and with stainless steel mounting hardware. Some final bending/adjustments will be needed depending on the lights you are mounting and orientation of the brackets. Check out the below for a video of them in action! Order at www.cruisercult.com !
One pair of brackets is $75.
Read important notes below for additional info about mounting:
*Off-road use only.
*80/105 series owners will not need the included mounting hardware and can reuse their stock knuckle bolts.
*If you are running stock suspension and bumpers may want to mount the brackets with the lights down low so the light clears the front bumper. Folks running lifts 3" and over or with high clearance bumpers, you can run them either way.
*Some additional bending of the mounting tab and adjusting of the bracket may be required depending on your needs.
*Works for factory steering configuration. High-steer and three link systems need to be tested. Contact us with questions.
FJ62 mounting
80 series mounting
No headlights:
With headlights:
The Cruiser Cult is excited to release our first product. Adaptive light brackets for solid axle Land Cruisers! These awesome little brackets allow you to mount small powerful lights to the knuckles of your cruiser giving you directional light where you need it the most! These were designed to mount on the 40,60,70,80 series (pics show them on a FJ62 and FZJ80) and likely and 1979-1986 Toyota trucks. They come pre-bent, unpainted and with stainless steel mounting hardware. Some final bending/adjustments will be needed depending on the lights you are mounting and orientation of the brackets. Check out the below for a video of them in action! Order at www.cruisercult.com !
One pair of brackets is $75.
Read important notes below for additional info about mounting:
*Off-road use only.
*80/105 series owners will not need the included mounting hardware and can reuse their stock knuckle bolts.
*If you are running stock suspension and bumpers may want to mount the brackets with the lights down low so the light clears the front bumper. Folks running lifts 3" and over or with high clearance bumpers, you can run them either way.
*Some additional bending of the mounting tab and adjusting of the bracket may be required depending on your needs.
*Works for factory steering configuration. High-steer and three link systems need to be tested. Contact us with questions.
FJ62 mounting
80 series mounting
No headlights:
With headlights:
Last edited:
