I see, feel free to show how it is helpful? Have you ever played with it, seen how they work? At this point in life, most of them are likely worn, and don't work correctly. They are cool tech, back in the day really wanted to find some redeeming quality, played with them a bunch, couldn't find any real world use. If it was an awesome thing, why was it removed on the '100 series?
You aren't really quoting SUMOTOY as your "expert" right? I thought just about everything he posted was debunked over a decade ago!![]()
Interestingly enough, I actually did some research on these way back in the late 80's when they were first starting to be developed. I was trying to get an understanding of the technology, but not much was able to be found. my instructor frowned on the information I produced because it was inadequate and not enough detail (it was proprietary at the time)
So, I stuck with my old-school Rockwell transfer cases and my NP 205's.........
When I got my LC, I thought that there was NO WAY that if one wheel was off the ground that the truck would roll or if the front was in a pile of snow, that I couldn't go any further.
So I tried it. I pulled the front end onto a snow pile with the rear tires on pavement. I stood on it and all that happened was one front tire spun. I was shocked and appalled. How could the greatest truck of all time be this helpless? I stuck it in low range (I didn't have the CDL switch installed yet), and continued to climb up and over the pile of snow.
Probably great in theory. But if I'm climbing or doing technical wheeling somewhere slick, I sure as hell don't want to lose traction on one wheel and be stuck there. Or put it in park, only to have one wheel slide and allow the truck to end up in the ravine at the bottom unless I lock in the CDL.
Yes, it's great for smooth AWD cruising in rain and stuff at highway speeds on smooth flat pavement and around the mall.... But where it counts, it's crap.





