shtbrwn86
SILVER Star
Will never go back to the hard bottles. Made doing the front diff super easy. Would have been tough and messy with the bottle and pump.
What have you done to your 100 Series this week? (79 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Will never go back to the hard bottles. Made doing the front diff super easy. Would have been tough and messy with the bottle and pump.
shtbrwn86
SILVER Star
Wondering that too. The main reason for going with the butyl tape is that it's forgiving to work with and comes off easy. No leaks either in almost two years.
audioviking
SILVER Star
Bought her an Ironman Foam Cell Pro 2" kit. And rcvd a National Luna battery monitor. So more heatshrink and soldering in my future...
Monday- Replaced my pastic license plate surround with a silicone one from Tactillian. Now there's notably less rattling when I shut the top gate.
Tuesday- Replaced the interior lights with LEDs
Thursday- Replaced the shifter with a new OEM one, as the leather was SO bad. Managed to not look up any instructions and try to take short cuts and turned a half hour job into an hour and a half job where I borked my OD switch. Disconnected the switch and ordered a replacement. At least now I know how to NOT do that.
Friday- Having replaced a plug and coil last week, I noticed the coil housing was particularly dirty, and suspected the valve cover gasket. So I replaced the VCGs, all the coils, and all the plugs, saving the cheap replacement coil I bought last week as a spare for future issues.
Saturday- Installed the 3" extension for the Hi-Lo shifter. The whole reason I started looking to buy another car was because my right wrist is no longer fully functional, making a manual difficult to drive some days. That Hi-Lo shifter was not good for it, but now its SOOOO much better!
Tuesday- Replaced the interior lights with LEDs
Thursday- Replaced the shifter with a new OEM one, as the leather was SO bad. Managed to not look up any instructions and try to take short cuts and turned a half hour job into an hour and a half job where I borked my OD switch. Disconnected the switch and ordered a replacement. At least now I know how to NOT do that.
Friday- Having replaced a plug and coil last week, I noticed the coil housing was particularly dirty, and suspected the valve cover gasket. So I replaced the VCGs, all the coils, and all the plugs, saving the cheap replacement coil I bought last week as a spare for future issues.
Saturday- Installed the 3" extension for the Hi-Lo shifter. The whole reason I started looking to buy another car was because my right wrist is no longer fully functional, making a manual difficult to drive some days. That Hi-Lo shifter was not good for it, but now its SOOOO much better!
Timing belt, fuel tank, ceramic coat, touch up paint, undercoating, oil change, interior deep clean, organized the back for now, changed hood struts, etc, etc...
shtbrwn86
SILVER Star
I love the dobinsons drawer system. Would really like that in my rig.
Nice! Are you guys running the Lightwerkz D2S lowbeam brackets?
I didn’t use the lightwerkz brackets…. If i knew what we had to do… i would get those ones instead of the ones i had.
Its been a while so Ive done a few updates.
After smashing off my reversing camera with my trailer hitch, using my thumb as a centre punch, I finally replaced the reversing camera with a better quality and mounted it up high on the ladder rack.
My car had also finally been finished from the body shop, with the last couple of little window trims, and windscreen flashings are now installed.
Then just because I decided that I definitely need it to help towing, had the mechanic fit up the spring helper air bags. But now need to work out what my actual ride height should be. He said it might already have a 2" lift which was news to me!
I really am starting to feel like its nearing completion....
Once I replace the seats
And get the engineering inspection
And maybe better mirrors
Also the stereo is a bit s***
After smashing off my reversing camera with my trailer hitch, using my thumb as a centre punch, I finally replaced the reversing camera with a better quality and mounted it up high on the ladder rack.
My car had also finally been finished from the body shop, with the last couple of little window trims, and windscreen flashings are now installed.
Then just because I decided that I definitely need it to help towing, had the mechanic fit up the spring helper air bags. But now need to work out what my actual ride height should be. He said it might already have a 2" lift which was news to me!
I really am starting to feel like its nearing completion....
Once I replace the seats
And get the engineering inspection
And maybe better mirrors
Also the stereo is a bit s***
I noticed at work the other day something didn’t look right about the back of my 100.. sure enough I was missing my rear spoiler.
Long story short, I recall hearing a loud smacking sound while I was driving down some country roads, assumed I kicked up a rock or something. I actually ended up going back to where I heard the noise and my spoiler, or pieces of it, were laying in the ditch.
Would love to replace it, but absolutely will not be paying the ridiculous prices people ask for these so delete for now it is.
Long story short, I recall hearing a loud smacking sound while I was driving down some country roads, assumed I kicked up a rock or something. I actually ended up going back to where I heard the noise and my spoiler, or pieces of it, were laying in the ditch.
Would love to replace it, but absolutely will not be paying the ridiculous prices people ask for these so delete for now it is.
Your license plate seems to reflect your emotions at the moment!I noticed at work the other day something didn’t look right about the back of my 100.. sure enough I was missing my rear spoiler.
Long story short, I recall hearing a loud smacking sound while I was driving down some country roads, assumed I kicked up a rock or something. I actually ended up going back to where I heard the noise and my spoiler, or pieces of it, were laying in the ditch.
Would love to replace it, but absolutely will not be paying the ridiculous prices people ask for these so delete for now it is.
View attachment 3285744
It was definitely a BLYAT moment. The noise and the realization.
There are a few eBay options that will paint it to match before shipping.
FWIW, all 100 series wings were cheap after market crap installed stateside after the trucks got off the ship from Japan.
FWIW, all 100 series wings were cheap after market crap installed stateside after the trucks got off the ship from Japan.
Somebody had one for $300 shipped the other day—best price I’ve seen in a bit.I noticed at work the other day something didn’t look right about the back of my 100.. sure enough I was missing my rear spoiler.
Long story short, I recall hearing a loud smacking sound while I was driving down some country roads, assumed I kicked up a rock or something. I actually ended up going back to where I heard the noise and my spoiler, or pieces of it, were laying in the ditch.
Would love to replace it, but absolutely will not be paying the ridiculous prices people ask for these so delete for now it is.
View attachment 3285744
I'm not sure if this one will work for you but it was recently posted for $350I noticed at work the other day something didn’t look right about the back of my 100.. sure enough I was missing my rear spoiler.
Long story short, I recall hearing a loud smacking sound while I was driving down some country roads, assumed I kicked up a rock or something. I actually ended up going back to where I heard the noise and my spoiler, or pieces of it, were laying in the ditch.
Would love to replace it, but absolutely will not be paying the ridiculous prices people ask for these so delete for now it is.
View attachment 3285744
For Sale - Fayetteville,AR 100 series wind deflector w/ mounts & hardware/OE Glass headlamps
100 series rear wind deflector. It’s in good shape with no cracks or chips. Mounting brackets and hardware are included. Was painted a few years ago with Sem satin black. Has a few scuffs but no deep scratches. $350 shipped 100 series Oem glass headlights. These are in good used condition with...
forum.ih8mud.com
And the seller is also selling some oem glass headlights but unfortunately they are LC100 instead of LX470 or I would have to buy them.
Sounds like a good opportunity to do a front-end swap!
$300 for a piece of old brittle plastic that will break again if not on pavement then out trailing? Pass.
