What Did You Do with Your 80 This Weekend? (69 Viewers)

[Qball]

Also did more permanent shaky mirror fix.

 

[concretejungle]

@concretejungle do you guys have a link to where you are getting this stuff ?

I am 99% sure i purchased mine from Summit racing. I'm not sure where he got his.

 

[NLXTACY]

View attachment 1198421

Wow, for such a clean truck and mods and fitment and everything else, I am downright honored to be the only sticker in sight.

 

[jfz80]

@half k cruiser

Yes that's the magnaflow 49 state (i.e. Non Cali) model y pipe and cat # 23120

I kept adding it to my basket till a vendor would apply their 20% coupon (magnaflow consistently excluded) and advance auto finally a came through a winner

Also on the floor is a 1140(?)vibrant resonator. Both discussed at length in here with part numbers but I can dig em up when I get home.

@LFD2037 yup sure is. Fished that guy out and buttoned it back up only to realize i had more work to do. Completely shot EMS (magnaflow) cat. It was fine with flow but stop at a red light and the rattle would chime in strong, like POS ford sounding strong

 

[Golgo13]

@half k cruiser

Yes that's the magnaflow 49 state (i.e. Non Cali) model y pipe and cat # 23120

I kept adding it to my basket till a vendor would apply their 20% coupon (magnaflow consistently excluded) and advance auto finally a came through a winner

Also on the floor is a 1140(?)vibrant resonator. Both discussed at length in here with part numbers but I can dig em up when I get home.

@LFD2037 yup sure is. Fished that guy out and buttoned it back up only to realize i had more work to do. Completely shot EMS (magnaflow) cat. It was fine with flow but stop at a red light and the rattle would chime in strong, like POS ford sounding strong View attachment 1199932

I see this and all I can think of is "BEES!"
I know its just the catalyst, but still, BEES! AAAAGH!

 

[TRAIL TAILOR]

Got started on the 80 series armor this week.

Front bumper is 90% complete. Still need to add the recovery points and wing reinforcements. It will sit for a week or so and then head off to the laser cutter for production.

J

 

[trichar2]

Drove it home for the first time. Created "To-Do" list of things to fix. Took the kids for a drive to create a fun, lasting impression.

 

[TheBelgian]

Got started on the 80 series armor this week.

Front bumper is 90% complete. Still need to add the recovery points and wing reinforcements. It will sit for a week or so and then head off to the laser cutter for production.

J

View attachment 1199947 View attachment 1199948 View attachment 1199950 View attachment 1199951 View attachment 1199952

Dude, that's hella clean! Love that low profile design... Didn't see this one on your website, how much do you ask for one?

 

[TRAIL TAILOR]

Dude, that's hella clean! Love that low profile design... Didn't see this one on your website, how much do you ask for one?

Thank you for the kind words. I haven't put it on my site yet. Once I get the numbers back from the laser cutter I will know better, but I'm thinking $895.00 bare metal plus shipping as seen above ( +/- a little pending final quote #s)

I will submit the front and rear bumpers together to get the best possible price point.

I hope to have everything finalized in the next 2 weeks.

J

 

[drowssap]

Got started on the 80 series armor this week.

Front bumper is 90% complete. Still need to add the recovery points and wing reinforcements. It will sit for a week or so and then head off to the laser cutter for production.

J

View attachment 1199947 View attachment 1199948 View attachment 1199950 View attachment 1199951 View attachment 1199952

Finally we get the reveal! And of course...it looks incredible!

 

[TRAIL TAILOR]

Finally we get the reveal! And of course...it looks incredible!

Thanks, well this design and me have a "history" if you will. But, as promised here it is and the rear will follow shortly.

J

 

[TheBelgian]

Thank you for the kind words. I haven't put it on my site yet. Once I get the numbers back from the laser cutter I will know better, but I'm thinking $895.00 bare metal plus shipping as seen above ( +/- a little pending final quote #s)

I will submit the front and rear bumpers together to get the best possible price point.

I hope to have everything finalized in the next 2 weeks.

J

Love it!!! Can't wait to see the finished product and the rear! I desperately looking for pricey alternatives out there ahah!

Will it be hylift friendly?

 

[dcguillory]

Got started on the 80 series armor this week.

Front bumper is 90% complete. Still need to add the recovery points and wing reinforcements. It will sit for a week or so and then head off to the laser cutter for production.

J

This is seriously sweet! I assume you will make a non-flared version?

 

[TRAIL TAILOR]

This is seriously sweet! I assume you will make a non-flared version?

Thanks and yes! Once I let the bumper sit for a week or so and I like everything after looking at it day in and out I will "clip" one side for the NON-FLARE rigs. Then I'll send the "2 in 1" bumper to the laser cutter for reverse engineering.

Final products will be fully laser cut and CNC bent for flared and non-flared rigs. Along with the rear bumper as well.

J

 

[TomH]

My Landcruiser was getting lonely so I picked up an LX450 to keep it company.

 

[LS1FJ40]

Got started on the 80 series armor this week.

Front bumper is 90% complete. Still need to add the recovery points and wing reinforcements. It will sit for a week or so and then head off to the laser cutter for production.

J

View attachment 1199947 View attachment 1199948 View attachment 1199950 View attachment 1199951 View attachment 1199952

I can't wait! I've waited years to get the "right" rear bumper and to replace my battered front TJM bumper. So stoked you finally succumbed to @warezdog and I pressuring you!

 

[LS1FJ40]

My Landcruiser was getting lonely so I picked up an LX450 to keep it company.

View attachment 1200122

Congrats! Go about five posts up, you need a new front bumper!

 

[Aloha Jen]

Just another day....pretty standard scenic and poser shots.

 

[TRAIL TAILOR]

I can't wait! I've waited years to get the "right" rear bumper and to replace my battered front TJM bumper. So stoked you finally succumbed to @warezdog and I pressuring you!

@LS1FJ40 @krzyabncanuck I hope to have the rear bumper in a "presentation stage" late next week.

So, others have asked about winch sizes with this bumper. The ComeUp 9.5 and 12.5 and SuperWinch 8500 and 10000# all work easily. The ComeUp 12.5 needs to have the clutch "cocked" from the forward to the top or rear position. Otherwise PLENTY OF SPACE!!

Pretty damn hard to follow up with bumper shots after an @Aloha Jen poser post... BUT, I'M GONNA DO IT ANYWAY!!!

J

ComeUp 9.5s

ComeUp 12.5

SuperWinch 8500 and 10000

A couple shots with the LED bar

 

[TheBelgian]

@LS1FJ40 @krzyabncanuck I hope to have the rear bumper in a "presentation stage" late next week.

So, others have asked about winch sizes with this bumper. The ComeUp 9.5 and 12.5 and SuperWinch 8500 and 10000# all work easily. The ComeUp 12.5 needs to have the clutch "cocked" from the forward to the top or rear position. Otherwise PLENTY OF SPACE!!

Pretty damn hard to follow up with bumper shots after an @Aloha Jen poser post... BUT, I'M GONNA DO IT ANYWAY!!!

J

ComeUp 9.5s

View attachment 1200360

ComeUp 12.5

View attachment 1200361

SuperWinch 8500 and 10000


View attachment 1200362

A couple shots with the LED bar

View attachment 1200363
View attachment 1200364

Looking good!! How much does it weigh?