Unobtainium (2 Viewers)
- Thread starter Racer65
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yeah, the lower dash pads are incredibly hard to find
Hello, I would like to know where I can by this item. I'm looking for it all over the world and at this moment nothing in my basket ;-(. Thanks for your answer.
tlaporte
SILVER Star
Contact @FJ40GURU or see his post a few replies later in the thread.
Post in thread 'Unobtainium'
Unobtainium - https://forum.ih8mud.com/threads/unobtainium.822577/post-15074269
Anyone know if there's someone who will refurb doors? I've picked up a decent set of doors that need some TLC...would rather outsource the refurb if that's an option.
Thx!
Thx!
Last edited:
overton
SILVER Star
I do manufacture this part however it does not have the rubber nib that goes in the hole on the spare tire carrier. I use a drywall anchor in the hole and a screw to attach it. The rubber nib is the reason most of these bumpers are missing. It often just came out or tore off. You can find this part here I still have some available. -> PARTS | Land Cruiser Nation - https://www.lcnation.com/online-store/FJ40-Spare-Tire-Carrier-Cushion-Ships-Free-p120432271
Greg
Hi community,
is there someone who ever hed the chance, or, even more, HAS this canadian spec rear roof vent louver???
A photo of the duct would make me happy!
And: please NO links to this certain ebay-er who is selling some vents, he calls his stuff "genuine" and i made the mistake to spend a fortune for this CRAP...
Your help would be VERY MUCH appreciated
Regards, Wolfgang
Vienna
is there someone who ever hed the chance, or, even more, HAS this canadian spec rear roof vent louver???
A photo of the duct would make me happy!
And: please NO links to this certain ebay-er who is selling some vents, he calls his stuff "genuine" and i made the mistake to spend a fortune for this CRAP...
Your help would be VERY MUCH appreciated
Regards, Wolfgang
Vienna
90982-02207 re-boot?
Happy Labor Day weekend cruiserdan sir ....
- no , these are simply NOS 90982- cables , a 7pc LOT that found me last week ...
- Phunny , you bring up 90982-02207 ?
- this is my latest rendition update of a 10 pack of reproduction 90982-02207 's i cranked out recently for the store below , i really enjoy the individual hands-on step-by-steps involved in getting these right & as close to period correct humanly possible using the on-hand LIVE jig-pattern original sample 90982-02207 , i have to create a saddle-system to piggy-back to that passenger side captured nut in the passenger side front inner apron
i was gifted by @4Cruisers many years ago to help my initial pipe dream idea off the ground , that also included a perfect original 90982-01414 too ...
- i have yet to find that long lost JDM-treasure map for those unique along-the-run single open barrel brass / and or OEM copper lugs ?
.
Last edited:
Most of these came in there original TOYOTA and or DENSO Parts Boxes , TOYOTA drive belt cardboard jacket sleeve things ....
.
.
Last edited:
4Cruisers
SILVER Star
Sorry to hijack this thread, but there's a much better solution using Toyota parts. Check out my earlier post - Post #19 here:
Distributor Tech - '75 through '77 Conversion to Electronic Ignition Using Toyota/NipponDenso Parts
This evening I finished upgrading a lightly used 2015 Trollhole electronic distributor using Toyota/NipponDenso parts. I replaced the stationary (breaker) plate with a '78 through '80 2F stationary plate, replaced the electronics with a new Camry (Celica, not Camry - it was late at night when I...
forum.ih8mud.com
Not understanding why modifying with Toyota parts is much better than using other proven non-stock parts though.Sorry to hijack this thread, but there's a much better solution using Toyota parts. Check out my earlier post - Post #19 here:
Distributor Tech - '75 through '77 Conversion to Electronic Ignition Using Toyota/NipponDenso Parts
This evening I finished upgrading a lightly used 2015 Trollhole electronic distributor using Toyota/NipponDenso parts. I replaced the stationary (breaker) plate with a '78 through '80 2F stationary plate, replaced the electronics with a new Camry (Celica, not Camry - it was late at night when I...
I use a modified GM HEI distributor that does the job nicely with no fuss and good parts availability. To me, good non-stock is good non-stock.
-
MatthewMcD
SILVER Star
@ToyotaMatt Are these available? I haven't gotten there yet, but may need to swap mine.
Sorry to hijack this thread, but there's a much better solution using Toyota parts. Check out my earlier post - Post #19 here:
Distributor Tech - '75 through '77 Conversion to Electronic Ignition Using Toyota/NipponDenso Parts
This evening I finished upgrading a lightly used 2015 Trollhole electronic distributor using Toyota/NipponDenso parts. I replaced the stationary (breaker) plate with a '78 through '80 2F stationary plate, replaced the electronics with a new Camry (Celica, not Camry - it was late at night when I...
Mr, @4Cruisers ,
would it be fair to say that my reproduction 19519-38030 / DENSO # 029799-0082 's little ones will fit ALL cylinder ignition shape coils ?
Being that there defined on the microfiche as a Cold-Spec add-on parts option .......
- or no ......?
.
Last edited: