Ultragauge Comparison

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I mounted mine on the "shelf" between the vents on the center dash. Doesn't block anything and is easily readable in all light conditions. At some point I'll get around to calibrating it, but I think it's invaluable to accurately monitor coolant temperature while driving in various conditions. After replacing my radiator and hoses, fan clutch, thermostat, etc I really have a good baseline on what my coolant temps should be and will be able to spot an issue before it becomes one.
 
Box Rocket - went with you mounting set up. Looks great, love having it acessible but not in the way.

Still getting familiar with Gauge but really liking it. I am struggling with the MPH correction numbers. If I am running 33s, anyone have an idea of what my correction would be? 1.1? Thanks!

-Rob



1.05 is the difference for 33, 1.1 is for 35s.


The reason I got scangauge instead of ultra gauge is that it's really slim. I mounted at exactly where box rocket mounted his and I get to see most of my gauge cluster. My only gripe is that I don't see the warning lights.
 
1.05 is the difference for 33, 1.1 is for 35s.


The reason I got scangauge instead of ultra gauge is that it's really slim. I mounted at exactly where box rocket mounted his and I get to see most of my gauge cluster. My only gripe is that I don't see the warning lights.
Yeah, that's interesting. I went with the UG because of the bigger screen and being easier to read at a glance. I like the slimmer design of the scan guage but I find it harder to get the information quickly because of the smaller display.
 
1.05 is the difference for 33, 1.1 is for 35s.


The reason I got scangauge instead of ultra gauge is that it's really slim. I mounted at exactly where box rocket mounted his and I get to see most of my gauge cluster. My only gripe is that I don't see the warning lights.

Thanks!
 
Added a picture for your amusement.
UltraGauge.webp
 
Scan gauge here too. My only gripe is the unit itself has a temperature warning when the unit is too hot. This is not a vehicle temp warning, just the gauge notifying you it isn't happy because its baking in the sun. That damn warning beep is annoying as all hell and goes off frequently when the truck is parked in the sun. Anyone know if there is a setting to shut off the internal temperature warning beep?
 
I got mine a few days ago to diagnose and clear a code. I've got it set up to show coolant temp, voltage, l/100km and DTE. It does not however support oil pressure, oil temp, or transmission temp.

20150318_190905.webp
 
What options are there for a real time temperature gauge for obd1 trucks
 
Is there an OBD2 gauge that reads oil pressure in addition to some of these other things? My temp gauge is not working at the moment and I had thought about using one of these plug in devices until I get it figured out.
 
Yeah, that's interesting. I went with the UG because of the bigger screen and being easier to read at a glance. I like the slimmer design of the scan guage but I find it harder to get the information quickly because of the smaller display.

I mount it right at where you mount it, top of steering column and find it very easy to read.
 
I put mine down on the shifter console exactly where the level-o gauge is in one of the pics.

With shift lever in drive, it is perfectly visible. In park its obscured but not reading it anyhow.

I noticed that its a bit of a novelty. I hardly ever cross reference it anymore, and frankly use it for resetting TC's when P0420 shows ups randomly when at light throttle around 35-40 mph for a mile or two.

While its an informative tool, I just don't find I need to focus on it, so mounting out of the way works as well.
 
I mounted mine to the far left AC vent using a "clip" from a Frebeze car air freshener. The "clip" fits perfect in the square slot of the cradle that comes with the Ultragauge. I can pull it out to reach the buttons. Snap it back in place. It's been there over two years.
 
Looking in to getting one of the ultragauges for my rig. Just wondering if anyone has the MX and if it will give trans temp? Don't want to spend the extra $10 and not have the option in the end...
 
Looking in to getting one of the ultragauges for my rig. Just wondering if anyone has the MX and if it will give trans temp? Don't want to spend the extra $10 and not have the option in the end...
It's not the reader that determines the available gauges. Trans temp is not monitored by the ECU so the data is not available on the OBD2 port.
 
It's not the reader that determines the available gauges. Trans temp is not monitored by the ECU so the data is not available on the OBD2 port.

OK, that's the info I needed. Guess I wasn't very clear in my question. I realize that the vehicle dictates what is available thru the obd2 port, just couldn't find a specific mention of whether trans temp was monitored in the 80. Saves me $10! Appreciate the quick reply.
Cheers
Matt
 
I ran a Scangauge for a few years, and swapped it out for an UltraGauge about five years ago.

I found the UltraGauge very user friendly, compared to my experience with my Scangauge.
fullsizeoutput_1c5c.webp
 
Back
Top Bottom