TJM T17

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

That's true clocking it would gave been smart. Access is easier than my pics show.

So far I am really happy with this bumper
 
thatcabledude said:
You guys that have this bumper, what do you think it would look like on a flareless rig? Looks like it would be sticking out a pretty good bit.

It sits flush with the outside edge of the flare so it will stick out that far.
 
Thanks a lot.

Really want the bumber, but buying a new bumper and cutting and welding to make it look right is not very appealing.

As mentioned earlier in the thread, maybe TJM has different wings available for the flareless trucks. That would be nice!
 
thatcabledude said:
Thanks a lot.

Really want the bumber, but buying a new bumper and cutting and welding to make it look right is not very appealing.

As mentioned earlier in the thread, maybe TJM has different wings available for the flareless trucks. That would be nice!

I looked at mine today in relation to the fenders and the main bumper itself extends out to the fenders. The wings take off from it at a 90 degree angle toward the rear of the truck
 
Would it be possible to weld grille and headlight protection onto this bumper?

I'd rather not pay the extra $400 for the T15 if I don't have to.
 
Would it be possible to weld grille and headlight protection onto this bumper?

I'd rather not pay the extra $400 for the T15 if I don't have to.

Probably but unless you can do it very cheaply you're probably better off just ponying up the extra cash.

Sent from my DROID BIONIC using IH8MUD
 
vserduchka said:
Would it be possible to weld grille and headlight protection onto this bumper?

I'd rather not pay the extra $400 for the T15 if I don't have to.

I thought about using the extra light mounting holes to attached a custom bent grill protector bar.....then attach auxiliary lights to that. A welded bar would be more expensive stronger but a bolt on seems pretty easy. Depends on your needs IMHO
 
Would it be possible to weld grille and headlight protection onto this bumper?


I'm thinking I'll go this route. Love the looks and price of the T17.
 
Last edited:
I may do it with aluminum tube from Home Depot.
 
Would it be possible to weld grille and headlight protection onto this bumper?

I'd rather not pay the extra $400 for the T15 if I don't have to.

TJM used to sell a "grille bar" that bolted on top and covered the grill area. I had one years ago on my Tacoma's T-17 bumper and I liked it a lot. Not sure if they are still available, but maybe one of the TJM dealers on here can let us know for sure.
 
Here we go.

Mocked this up in everyone's favorite vector graphics program.

4 bends, 6 welds, and some grinding to get the two headlight guards to the right curvature.

Can't be that expensive, right?

I'm thinking around $200 for the parts and the labor.
TJM T17.webp
 
I bought this bumper from a fellow mudder he gave me a great deal on it but the first time i went wheeling i hit dead center on my fairlead on a boulder and it buckled like cheap chinese beer can. They are not as sturdy as a arb but they are much less $$$$$ also. I have since fixed it i ended up cutting the center section out and usink 3/16'' steel for it and mounted the winch on top i will post pictures of what i did. my opinion is if u are going to wheel your rig spend the extra cash for a slee or arb bumper or maybe some thing custom fabbed.
 
Back
Top Bottom