TJM T17

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

tjm hybrid

tjm plate.webp


tjm cut out.webp


tjm new.webp
 
looks like TJM USA was bought recently by summit? also the shipping cost doubled from Slee within the last year due to the box dimensions changing? quoted from UPS $108+ (represents about 25% of bumper cost!)


not as feasible or attractive option as it once was
 
Have you inquired with Summit about it?

looks like TJM USA was bought recently by summit? also the shipping cost doubled from Slee within the last year due to the box dimensions changing? quoted from UPS $108+ (represents about 25% of bumper cost!)


not as feasible or attractive option as it once was
 
I spoke with TJM a few weeks back when I was looking for the winch plate needed for the TJM17. The gentleman on the phone informed me that Summit would be responsible for their distribution and shipping from here on out, he did not mention anything about them being bought out by summit. I'v always had good service with Summit, and TJM products are top notch; maybe this is a good partnership?
 
For those who care...

Out of curiosity I contacted Summit last night. While it is not listed on their website, the T17 will be available sometime in May for ~$605 plus shipping.

Slee shows it for $525 plus shipping.
 
I have a freshly powdercoated ARB that I have had since 2003 and it was a bit corroded on the bottom side ;-) [hence the sandblast and powdercoat in January]....with that said I originally wanted a T17 but couldn't find a distributer back then.

now with the truck in the bodyshop getting rocker panel repaired etc, I am contemplating changing to a T17, but unsure as I have the ARB still.
slee doesn't have any but summit website does indeed list it as in stock.

I would try and sell my ARB but as im on the east coast, I think shipping etc will cause that to be a nightmare.
 
Bumping this thread to ask a quick question: this is a steel bumper, correct? That's what the Summit description says, but their ad also looks very "thrown together). I know some of the TJM stuff is aluminum. I'm itching to get a new bumper, but I'm having trouble striking a balance between cost and looks.

I could make my own, but my wife is already starting to resent time spent in the garage. The T17 doesn't quite look right to me (stick out too much at the corners, IMO), but if it's just steel, I could fix that later.

Also, the Summit ad describes recovery points that I don't see in any of the pictures. Any insight into this issue?

Please and thank you!
 
Bumping this thread to ask a quick question: this is a steel bumper, correct? That's what the Summit description says, but their ad also looks very "thrown together). I know some of the TJM stuff is aluminum. I'm itching to get a new bumper, but I'm having trouble striking a balance between cost and looks.

I could make my own, but my wife is already starting to resent time spent in the garage. The T17 doesn't quite look right to me (stick out too much at the corners, IMO), but if it's just steel, I could fix that later.

Also, the Summit ad describes recovery points that I don't see in any of the pictures. Any insight into this issue?

Please and thank you!

I dont think this bumper is available at all anymore. I even spoke with Slee recently and they do not have any (even though it is still on their site).
 
That's a bummer. back to the drawing board.

Phil, do you plan on making one for the 80? I'm assuming price will be higher than the $600 the TJM was going for? The only real reason I was considering it is because slee is local and I could pick one up and save the shipping.
 
That's a bummer. back to the drawing board.

Phil, do you plan on making one for the 80? I'm assuming price will be higher than the $600 the TJM was going for? The only real reason I was considering it is because slee is local and I could pick one up and save the shipping.

Wrong forum
 
Last edited:
Bumping this thread to ask a quick question: this is a steel bumper, correct? That's what the Summit description says, but their ad also looks very "thrown together). I know some of the TJM stuff is aluminum. I'm itching to get a new bumper, but I'm having trouble striking a balance between cost and looks.

I could make my own, but my wife is already starting to resent time spent in the garage. The T17 doesn't quite look right to me (stick out too much at the corners, IMO), but if it's just steel, I could fix that later.

Also, the Summit ad describes recovery points that I don't see in any of the pictures. Any insight into this issue?

Please and thank you!


Wrong forum
 
Last edited:
the 80 series models seems to stick out a lot more judging by the other photos in this thread
 
haha, I was wondering :flipoff2:
 
So the T17 is back in stock at Slee. I called and verified and they said they did indeed have them.

However, price is now $599 + ~$125 shipping so that starts getting into the "why dont i just pay $200 more and get an ARB?" territory.
 
So the T17 is back in stock at Slee. I called and verified and they said they did indeed have them.

However, price is now $599 + ~$125 shipping so that starts getting into the "why dont i just pay $200 more and get an ARB?" territory.

$800 for an ARB is a good price.:clap: Where did you find such a good price? Link
 
Ok, maybe $300 more...or 400 :)

The ARB can be found with free shipping in several places, so for me it seems like the extra more will be worth it in the long term.
 
hey guys I just recently got a t17 bumper but when I purchased my 94 FZJ80 it didn't have a bumper or the hardware. now going by the instructions it says I need to reuse the stock bumper bar bolts. can anyone help me find a set or at least what they are called. I talked to one of the parts guys at my local dealer and we really couldn't determine which bolts I need. any help would be great
 
Back
Top Bottom