time to go wheelin

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 4, 2006
Threads
2
Messages
32
Location
Vancouver, WA
After going 10 years without a FJ due to selling it while still in high school (one of the more regrettable moments of life), I was able to get a 1980 FJ40 for a song 5 years ago. LET THE PROJECT BEGIN. Pretty sure but not 100% of what to do, I stripped it completely and began building my trail rig. I was able to get it out of the shop finally this year and hit the trails with my son. As you can see it is far from done. It was a long time waiting and the time on the trails and with my son was more than worth it.

I want to hear your opinions. I know it will not measure up to all the resotration guys but it is great project and works for me.

1980 FJ40
383 stroker NV4500 Atlas 3.8
Currie 9" high pinion w/ disc, Detroit, 4.10
Toyota front, ARB, 4.10
four link front and rear, King coilovers front and rear
Currie anti-rock sway bars front and rear
Others later
DSC_3967.webp
DSC_3964.webp
 
Nice! And welcome. I am up in Seattle. Nice to see another WA on the board.

Looks pretty set up. Post some picks of the underside.

Those mufflers look like they are in a pretty vulnerable place.

Any further plans? Any trail problems from what you've done so far?

Andy
 
First trip was in July at Trail jamboree in Naches. I was having problems with the coils not being set up correctly and the front unloading. That has since been corrected. Carburated. Do I need to say more. Cant wait for some money to change to TBI.

The exhaust might get changed but it gets me going now. I stretched the body 5 inches in the nose and am at 101-103" wb. To get the exhaust in the frame will be some custom work for sure.
 
Thanks

The ride is pretty good. lots of tweeking to get it all dialed in.
 
What's with the rear axle being significantly weaker than stock? Is that because it is the high pinion version of the 9"? Aren't those high pinions really an 8.8? My memory is kinda foggy.
 
Where do you get your information. I think you are way off track.
 
What's with the rear axle being significantly weaker than stock? Is that because it is the high pinion version of the 9"? Aren't those high pinions really an 8.8? My memory is kinda foggy.

The Currie high pinion uses a reverse cut 8.8" ring gear. The stock gear is 8.875", and the high pinion axle in the rear of a rig means it's running on the 'coast' (weaker) side of the gears.

Currie says not to use tires larger than 35" on that 3rd.
 
I was the guy at the jamboree that ended up at the hospital because my son got his hand caught between a stump and the roll cage nearly severing his ring finger and pinky on his right hand.

Sorry for the cauky remark about the 9". I did not now it was on the coast side.
 
Advent:

Thanks about the tube fenders. Trying to keep the FJ look yet making a trail rig that dosent just mangle on every tree you bump was the issue. 1.5" tube to replace the curved edge of the fenders and roll it all the way through the rig I thought was cool.
 
I was the guy at the jamboree that ended up at the hospital because my son got his hand caught between a stump and the roll cage nearly severing his ring finger and pinky on his right hand.

Sorry to just contribute Chat to this thread, but I have to say the whole 400 of us were pulling for you and your son. I drove by that stump the next day and saw your red paint on it. I think you already know this, but every one at the Jamboree was full of sorrow and willingness to do what we could. I hope to hell your boy comes out of it OK.
 
Back
Top Bottom