285.75.18 》 34.8"
2" lift, stock UCA
no body lift, no spacers, no rubbing
2" lift, stock UCA
no body lift, no spacers, no rubbing
Show off your 100 beast with 35's.....
- Thread starter PurpleHeartLC
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
34.5
stock gears as well? if so how do you find it in the mountains?
Yes stock gears, a750 auto.
Not much different than 33s, both downshift to 4th to maintain speed, 3rd to accelerate. 35s rev a bit higher than 33s.
But for highway, it gives me 16.9 mpg of pure highway driving, hand calculated, twice, love it!
It revs lower than 31s and 33s, obviously, mostly 1800 rpm at 100km/h.
For city, maybe worst than 31s haha!
Mostly alone in the car, with overland gear.
So if u have family or towing, i can think you'll need to regear, but try it first!
35 x 12.5 x 18
+40 offset
Yokohama G003
AHC
+40 offset
Yokohama G003
AHC
Last edited:
295/70/18 Toyo MT. Specs say 34.5. On Tundra Steelies with 1.25 inch Bora spacers.
I'm going to 35s when my current Toyos wear down in a few months.
295/70/18 Toyo MT. Specs say 34.5. On Tundra Steelies with 1.25 inch Bora spacers.
Stock height? AHC in N in pic?
Nope. Ironman FCP 2 inch lift.
What a beast, curious if it’s still running on AHC?
Foam Cell Pros
You’re on 295/18’s right?
See Post #70 in this thread
Show off your 100 beast with 35's.....
Let the man have his 35" tire picture thread! We already have a pic thread, the issues other folks have is that this is supposed to be a tech section and technically you don't just slap them on and go off-road. If you do and your not rubbing then you're not flexing the truck on real...
forum.ih8mud.com
Is it worth it for 1/2”?
285/75/17 currently.You’re on 295/18’s right?
See Post #70 in this thread
Show off your 100 beast with 35's.....
Let the man have his 35" tire picture thread! We already have a pic thread, the issues other folks have is that this is supposed to be a tech section and technically you don't just slap them on and go off-road. If you do and your not rubbing then you're not flexing the truck on real...
Is it worth it for 1/2”?
I've argued a lot in my life over a half an inch. Why stop now?
On 35s and no regrets 
Do 295/70/18 (34.5") count? Still on AHC, no lift but re-geared to 4.88
Close enough! My 35x12.5 only measure 34.7" tall anyways
Can I join the cool kids club now?
315/70/17 on rock warriors. 1.5” spacer on front, no spacer yet on rear as they aren’t here yet. I need to measure my hub to fender as my rig is on the lower side.
Played in the ditch to see what all I’ve gotta trim.
315/70/17 on rock warriors. 1.5” spacer on front, no spacer yet on rear as they aren’t here yet. I need to measure my hub to fender as my rig is on the lower side.
Played in the ditch to see what all I’ve gotta trim.
