Rusted tight steering stabilizer help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2006
Threads
2
Messages
12
Location
Colorado Springs
I have a 75 FJ40. My steering stabilizer is shot and rusted tight to the mountings. I have pulled the cotter pins, removed the nuts without any problems but neither of the stablizer mounting pins will move one bit. I sprayed it with WD40 over several days and pounded it with a 3 pound hammer repeatedly but the pins won't even budge from the mounts. Its like they are part of the frame. Any suggestions on how to remove them would be appreciated!!!!!
 
i had to cut mine off, but i went ps so didnt care

x2 pickle fork
 
A pickle fork is the tool of the gods. I hamered on my stabilizer forever and it wouldn't budge. Bought a pickle fork from Sears and I had both ends off in less than a 30 seconds. Never doubt the old tools!

Thanks for the tip!!!
 
Back
Top Bottom