RTH in Moab, Utah

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 31, 2012
Threads
23
Messages
112
Location
Aspen, Colorado -- where the beer flows like wine.
A day of pounding our 1992 FJ80 in Moab and we are really stuck. The spindle nuts, or wheel bearing nuts, whatever you call the 54 mm nuts in the axle, they got chewed up as we apparently drove with them loose. They basically have no thread left, and the auto part stores have nothing. So I am stuck in an air bnb garage.

Anybody out here? 970-274-4103
 
I’m confused. What’s stripped exactly? Pictures speak volumes here.
 
Probably best (closest) bet is Grand Junction or Kurt at Cruiser Outfitters in SLC.

But....
You might go down to Moab Motorsports and talk to Rory. His old man worked for a place in town that has a whole fleet of 80 series they do tours in.

Hes a pretty good dude. Tell him Max with the 80 series/cummins sent you.
4352591109

If they can’t help you maybe try that tour place directly. They’re called Navtec Expeditions.
 
Probably best (closest) bet is Grand Junction or Kurt at Cruiser Outfitters in SLC.

But....
You might go down to Moab Motorsports and talk to Rory. His old man worked for a place in town that has a whole fleet of 80 series they do tours in.

Hes a pretty good dude. Tell him Max with the 80 series/cummins sent you.
4352591109

If they can’t help you maybe try that tour place directly. They’re called Navtec Expeditions.
I have a call in to the mechanic at Navtech, but it’s Saturday night and I’m a bit worried about my prospect for parts tomorrow.
 
I've got all the parts available here in SLC, new spindles, spindle nuts, etc. I can't think of anyone in Moab that might have a spare spindle outside of Navtec. @Jason hansen is local and might have an idea
 
Last year I broke an axle shaft at Moab and Navtec basically told me to piss off because there mechanic was very busy. Good luck there.

@Jason hansen offered me help and even bought me a beer at a local watering hole. He is a good guy and one more example of how valuable membership in this community can be.
 
ferretlegger is also local in moab. He's a taco guy, but may be able to help as well.
 
Any updates. I'm out and about but could grab a spindle, some gaskets and wheel nut kits and meet you somewhere south.
 
In Mexico sorry I could not help.
 
Back
Top Bottom