NLFS Random Archived Classifieds
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Status
sm420 or sm465 adapters
I need an adapter for a sm420 or sm465 to go to 3 speed t case or to a dana 18
please e mail me at thewatergoblin@yahoo.com
I need an adapter for a sm420 or sm465 to go to 3 speed t case or to a dana 18
please e mail me at thewatergoblin@yahoo.com
FJ-80 Antenna & Cargo area/3rd row carpet Grey
Need the antenna for a FJ-80, and the 3rd row seat/cargo area carpet, grey prefferably.
Need the antenna for a FJ-80, and the 3rd row seat/cargo area carpet, grey prefferably.
wanted: high steer 4 fj40
need high steer parts for soa conversion that i will be starting
need high steer parts for soa conversion that i will be starting
be sure to specify bolt pattern...also, older bolt pattern won't be as easy to find.
high steer arms
We make 'em at 4x4labs for any vintage and straight axle style except for 80 series.nuclearlemon said:
Lift Gate Ladder in CO (if you want one.)
I've got one of Mot's ladders here in Denver this weekend only and if you want one let me know through a pm and I can get it to you. You'll have to get with him on a price. He probaby still has them in the for sale section. Work it out with him and I can show it to you or email a pic (maybe). I'll be leaving for ID Sunday morning and won't be back until the beginning of September and I could bring it back then if someone hasn't bought it.
I am slammed with job interviews and a sprinkler system so I won't have time to really meet anyone unless it's on my way somewhere.
B - MOTification Ho
I've got one of Mot's ladders here in Denver this weekend only and if you want one let me know through a pm and I can get it to you. You'll have to get with him on a price. He probaby still has them in the for sale section. Work it out with him and I can show it to you or email a pic (maybe). I'll be leaving for ID Sunday morning and won't be back until the beginning of September and I could bring it back then if someone hasn't bought it.
I am slammed with job interviews and a sprinkler system so I won't have time to really meet anyone unless it's on my way somewhere.
B - MOTification Ho
On my 91 I used a Dodge application cat. It had dual inlets and a single outlet. It laid horizontal in the factory location instead of vertical. You might check with a muffler guy as it was cheap and a higher flow. $238 installed
dgangle
total rice
I personally know that the 83 and 84 FJ60 FRONT dshafts have the CV as this is what I have used on mine. As with anything else shop around as I bought mine ofr $60 or less approx 1 year ago. Some wanted as much as $300 each.....silly faggots. You can have a custom Tom Woods one for that. I got a minitruck front dshaft w/CV that I disassembled I'll sell. Let me know and we can discuss.
fj 60 body parts needed
some old fart pulled out in front of me but the dumb cop said it was my fault. anyway. I need pass. side quater pannel, grill, emblem, all that stuff. dark blue if posible. I will be driving from NE to NC and then from NC to TX the middle/end of next month. If you live anywhere between these locations and have what i need hit me up. I'm a poor college kid so I can't spend a ton on the parts.
some old fart pulled out in front of me but the dumb cop said it was my fault. anyway. I need pass. side quater pannel, grill, emblem, all that stuff. dark blue if posible. I will be driving from NE to NC and then from NC to TX the middle/end of next month. If you live anywhere between these locations and have what i need hit me up. I'm a poor college kid so I can't spend a ton on the parts.
dgangle
total rice
goto any fastner place that sell metric. Added points for SST.
dgangle
total rice
don't have one but make sure you get the one you want. IIRC, 75 and ealier use rivets to fasten center to rim while later with front disks are welded. The laters will work on earliers but not vice versa. Also I found few willing to break up a set. Keep trying and good luck. Have you considered anyplace that straightens wheels? May be cost prohibitive.
Thought this might get moved. 
I let Butch take two different types of ladders and IF I guess it right, these are pretty close to the pics of the one that he did not take (different angles to show mounting points: no drilling necessary):
Not sure about the diameter of it, but IIRC, not too beefy (may or may not be an issue).
I let Butch take two different types of ladders and IF I guess it right, these are pretty close to the pics of the one that he did not take (different angles to show mounting points: no drilling necessary):
Not sure about the diameter of it, but IIRC, not too beefy (may or may not be an issue).
):- Status