Pleasant surprise.....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 8, 2013
Threads
282
Messages
1,476
Location
North GA
IMG_0238.webp
IMG_0239.webp
IMG_0240.webp
After saving this 80 a couple of weeks ago from a neglectful owner, I have since realized what a clean truck I've found myself in posession of! He told me it was completely rust free and he was correct. I'm in the process of replacing just about every seal so it of course was covered in oil! Cleaned it up pretty good and the undercarriage is awesome!

No rust, and on top of that parts of it look like it just came off the show room floor. I'm still cleaning off dirt and oil but even as it stands you can see how everything still has the factory black on it. The majority of bolts are still brass.....even under the hood. The air filter container clips are still brass as well.

I've owned many, but this is the best, at least underneath that I've purchased. Interior needs some love, and the engine needs a lot of PM, but I'm daily driving it and loving it more each day. The original springs even show their color markings. Anything that looks like rust isn't ......just GA dirt and oil from the leaking oil pump.
 
Anything that looks like a brass bolt or nut is gold passivated zinc plated steel.
Nice looking truck.
 
Looks great! You know it's gonna be good when the zinc plating is still intact. It's harder by far to keep the underbelly of a truck nice vs the exterior
 
Isn't it nice got mine the same way leaked from every ware completely covered with oil & 90 wt. It's a Calif. Valley car the bottom of the body has factory fresh paint still zero rust.
 
Don't fix the leaks! You'll remove the anti-rust coating!
 
More factory powder coat.....95% of the under belly looks like this!

The more I think about it I feel this would be a great truck to put some $ into. I'm concentrating on stopping the leaks but after that I may price out a head job and go from there. Difficult to find frames and undercarriages like this.
20161222_100201.webp
 
Looks like you found yourself a mall cruiser. Soccer moms drove these things around and never offroaded or took care of them. Mine came from a texas habitat of mall cruisers.
 
Stop cleaning the rustproofing off the undercarriage. I did that and now when I get under there, I see rust where there was caked on grease.
 
I was so pissed at the PO during the buying process that I was going to just walk away. It was very clear he was misrepresenting the truck. And as everyone here knows, you don't do that :slap:

But after I brought his expectations back down to earth I decided to go ahead and pick it up. Not to mention it was my favorite black on grey with lockers. I've spent the past 2 weeks doing PM items including tranny flush, Tcase, and diff fluids today. Heater hose and drive belts etc. Still need to put a stop to the oil pump/crankshaft seal leaks.

I was going to sell it to someone who could really give it the attention it needs. But now I'm thinking it might be near impossible to find another non restored frame/undercarriage like this :hmm:
 
How are you cleaning the bottom of this thing?
 
I was so pissed at the PO during the buying process that I was going to just walk away. It was very clear he was misrepresenting the truck. And as everyone here knows, you don't do that :slap:

But after I brought his expectations back down to earth I decided to go ahead and pick it up. Not to mention it was my favorite black on grey with lockers. I've spent the past 2 weeks doing PM items including tranny flush, Tcase, and diff fluids today. Heater hose and drive belts etc. Still need to put a stop to the oil pump/crankshaft seal leaks.

I was going to sell it to someone who could really give it the attention it needs. But now I'm thinking it might be near impossible to find another non restored frame/undercarriage like this :hmm:

Yeah, misreprenting a 20 year old car to someone who can't replace his own heater valve. Then cries at the work he the techs did at his dealership he works at. ( Toyota dealer) Yet alone he buys a aftermarket part and then cries about the hose clamps they used.

if the seller knew what he was doing, he replaced the zinc bolts and sprayed tire foam underneath the whole car.
 
Are you the slacker PO? Who :poop: in your corn flakes?

I took it to a car wash and had them use a heavy duty degreaser first; after that I hit it a few times with more degreaser and again with high pressure.

And I thought about the "flush" causing issues 4G63......but after the lack of maintenance shown by the PO I just felt better having it done. We'll see.

And yeah, Cali seems to be the honey hole for clean cruisers!
 
Last edited:
Back
Top Bottom