O2 sensor (what to buy?)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 26, 2017
Threads
1
Messages
3
Location
EU
Hey guys.
Help me please. My TLC80 have 2 o2 sensors (94 year)
I replaced 1 (original toyota, very expensive)
So need to replace second o2 sensor.
What WORKING analog can I buy?
just bought denso early and it didn't work (resistance is not correct, need 5-6ohm denso was 10-11ohm its for model after 95 year)
If you know, please, tell me (and other people too :) ) what universal O2 Sensor work good? (just have 5-6 ohm) (need a part number)
P.S. sorry for bad english... :)
Also I'm asking o2 sensor not only for tlc80, just need universal without connector
 
it's original...
also I bought 89465-69125 this (1-st time)
I think work good... (test Ox2 on diagnostic and I see 0,1 - 0.9v)
need universal, same denso, bosch etc. just cheap
 
Bosch will throw a CEL and O2 code.
 
baying toyota kit 89465-60110 ( two sensors and hardware) for 236.44$ is cheaper then baying 2 Denso sensors and much better deal

the sensors i got form Toyota japan and the original i had on my rig were manufactured by NTK Japan
 
@beno told you want ya need, either buy that or keep chasing it that is your choice
 
@beno told you want ya need, either buy that or keep chasing it that is your choice

I agree with this. If your looking for cheap then go buy whatever you want and hopefully it will work. The PN# that Beno gave you will for sure work. Myself and many others have tried doing this the cheap way and it just doesn't have a track record of working out.
 
Just I can’t buy this kit (or original o2 sensor) because if I order it i’ll Receive within month only...
But universal usually some days.

So, if somebody know number of o2 sensor (universal) 5-6 ohm tell please...
 
Are 95 land cruiser as picky about o2 sensors as the 94s? Or can you run aftermarket sensors?
 
Buy the kit Beno told you about. Here's a photo of the kit, you'll get 2 new sensors, 2 new gaskets along with 4 new nuts, and it's all factory Toyota parts.
toyota-land-crusier-parts-074-jpg.1510046
 
is that for 93-94? I'm not sure that 95 has the same part number
 
Is there a 2 sensor kit for the 95-97 Like for the 93-94? Or can you get by with just replacing one instead of both?
 
Is there a 2 sensor kit for the 95-97 Like for the 93-94? Or can you get by with just replacing one instead of both?
If I'm not mistaken, the 95-97 uses 4, O2 sensors, one sensor in front of each cat, and one sensor after each cat. The 93-94 only uses 2, O2 sensor's, one in front of each cat, so that's why the 93-94 kit comes with 2 sensor's.
 
95-97 has only 2 O2's
Your correct, i was wrong, i just looked in my 97 LX450 service manual, and It's one O2 sensor before and one sensor after the cats on the 95-97.
 
1994 has 2 o2 sensors, side by side. Same part number for both. Pain in the arse to change.

1995 and up has two o2 sensors, 1 before and 1 after the cat. Different part numbers for each.
 
1995-1997:

89465-69085
89465-69105

These will come with gaskets but will not come with any hardware. 90179-08059 x4 will net you the lock nuts for the studs. If you need new studs and can get the old ones off, 90116-08211 will work perfectly.
 

Users who are viewing this thread

Back
Top Bottom