Newb

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 29, 2018
Threads
14
Messages
84
Location
Texas
Hey, all! New member here. Recently purchased a 1996 LX450. This purchase is about 4years in the making. I didn’t know what a Landcruiser/LX450 was prior to buying my old(98) 4Runner. I immediately wished I would have bought one, instead. Figured I’d make the best of the 4Runner for a while. Lift, plate bumper, winch, roof rack, etc. I got bored with it and decided to sell it. Found a pretty clean LX at a lot, and jumped on it. Currently has the common P0401 DTC. Plan on fooling around with it this weekend. Didn’t have the LX home for an hour before I did my first “mod”. Took those damn running boards off. Anywho, look forward to getting to know my cruiser, and am really impressed with the amount of info in this forum. Cheers!

1B9823E7-1AC0-4952-8613-4ED554FE59B7.webp


7FF849AB-40D4-491B-9B73-26DCE442E6AB.webp
 
welcome :cheers:

maybe arcteryx=CruiserYard (great used part vendor) here on MUD has a flare for you
 
Mod #2 will be to remove the front and rear damage multipliers.......
 
I love those 3rd gen runners, but definitely a different creature. x2 on damage multipliers, that would have been mod #1 for me :hillbilly:
 
welcome :cheers:

maybe arcteryx=CruiserYard (great used part vendor) here on MUD has a flare for you
I do have some.

Mod #3 - remove the rest of the flares

I disagree, keep the flares. Not because I am selling them, but because I think it looks better. I have them on my locked 94 still. Caveat would be if you do a lot of wheeling, then de-flare.
 
Are the flares glued on or will there be holes in the body once removed?

Arcteryx, can you get the factory key fobs?
 
Are the flares glued on or will there be holes in the body once removed?

Arcteryx, can you get the factory key fobs?

There will be holes in the body when the flares are removed. Look at the area where yours is missing. That tells the tale pretty easily.
 
I can’t roll with holes in the body. My OCD is too bad for that. I’ll probably order another one from the fella above.

Bumper and tail light guards are coming off tomorrow.
 
I couldn’t wait. Did it before me and the wife go out tonight. Looks so much cleaner. What does all this go for if I were to put it on Craigslist?

EC9C5740-6342-413A-84A9-22B9E895413C.webp
 
$20 or free for the cost of shipping usually.

Everyone gets rid of it, except that RARE occasion that someone is wanting to restore, but that is highly unusual.
 
Welcome if your goin to wheel for real rem
DJI_0012.webp
ove flares JMO
 
I couldn’t wait. Did it before me and the wife go out tonight. Looks so much cleaner. What does all this go for if I were to put it on Craigslist?

View attachment 1823140
I couldn’t wait. Did it before me and the wife go out tonight. Looks so much cleaner. What does all this go for if I were to put it on Craigslist?

View attachment 1823140


you just got it, you seemed to like it, and now (just a few days later) you want to sell it ? - I don't get it :confused:

that said, make an offer and I will take it off your hands - fair price :cheers: :bounce:
 
Are the flares glued on or will there be holes in the body once removed?

Arcteryx, can you get the factory key fobs?

As mentioned, there will be holes and to fill and paint them properly will be more than putting on the flare. The LX is much worse, it has many more holes due to the cladding. First time I parted one out I was amazed at how many were in the rocker panels and doors.

Part wise, I can get anything if it is still available and my new part stock goes up monthly. Email me if you need something specifically. I don't have any used ones though.

Congrats on the purchase btw, the 80 is the best platform.
 
you just got it, you seemed to like it, and now (just a few days later) you want to sell it ? - I don't get it :confused:

that said, make me an offer and I will take it off your hands - fair price :cheers: :bounce:

C- I think he is referring to the damage multipliers.
 
Back
Top Bottom