Mediablasting an FJ40....$$$???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 16, 2006
Threads
166
Messages
620
Location
Tulsa, OK
Can anyone give me a ballpark figure on how much a reputable business would mediablast my entire 40 for? (Top, tub, fenders, hood, doors, etc...)

OR...

Should I rent media blasting equipment and have all the fun myself (and how much would this cost)? (I don't currently have a compressor and all of the local equipment rental places say their equipment is too powerful for an auto body)

What media should be used for an old FJ40 body?

OR....

Is there an easier/cheaper way to clean off the old paint (stripper etc...)-I would rather blast it.

Lastly, what do you do with the bare metal immediately after it is exposed to the oxygen?


Thanks
 
I think it may depend largely on your location and environmental constraints for the sandblaster/media blaster. I have found here in socal that it is expensive to sandblast and even more $ to media blast. It is best to find someone that is knowledgable in sandblasting automotive stuff and won't go through or warp the metal. Search sandblasting for much more info. Good luck.

Noah
 
last i shopped blasting in salt lake city, i was estimated $300-400 for blasting entire body and frame. that was also fully disassembled.

havent actually spent the coin yet, so who knows. sounded a little low to me, but i consistently got that number range from the numerous guys i spoke with.

i have had cruiser body panels blasted with sand/silica without issue.

if you live in a dry place like i do, it doesnt matter what you do with the steel when it is bare as long as it stays dry. in your neighborhood, i dunno. how long are you planning on having it sit bare?


HTH
 
A few things first. Do NOT EVER USE SAND. It creates heat and fawks up metal. It will create warping and all your spot welds will disapear. the frame, this is a good idea to do in sand.

If you can do walnut shell on all body panels it looks like all new metal and easy to prep.

I paid $800 to do all body panels. All meaning every painted piece inside and out. Another $600 ish on every other part from diff housings, backing plates, to seat sliders. there is about 200 pieces all together.

Hope this helps.
 
I recently got my hands on a small blast cabinet and have found the various black diamond media works well although I am just doing small parts. I have been unable to find someone in my area willing to do a body but I have found that blasting and powder coating the frame alone will cost me between $350 and $450 in Acworth, GA. Of course this includes the powder coating. I have had friends in VA get their bodies blasted and the only draw back (as long as somebody does not warp your panels) is trying to clean the media out of the body - IT IS IMPOSSIBLE TO GET IT ALL OUT!

As far as what to do with bare panels, I have heard but not tried simply smoothing and spraying with epoxy primer or a self etching primer. I know that epoxy primer should be used because unlike other primers it is water proof. Most other primers are very pourous and allow water to enter and trap it next to the metal. That is why you should never drive around a car with just primer on it in the rain or high humidity.

Another alternative is chemical dipping. IF you can find one in your area, this is great to remove all paint, plastic, rubber, rust, body filler, etc and the metal is usually coated before it leaves the shop with a rust retardant but you should not leave it alone long. The problems with this is that ALL the paint is removed and without dipping the body you will never get paint on some hidden nooks and crannies and if there is just a bit of rust holding some panels together that will go away to. Without a duobt this is the easiest way to ensure a CLEAN body.

I am in the process of a frame off and just plan to blast the small stuff and use airplane stripper by hand on the big stuff. Its a hobby so elbow grease is something I am willing to spend.

Anybody have any other suggestions on what to coat bare metal with after blasting, scraping, sanding, or stripping? and second: can anyone explain how self etching primer works and if it is availbale someplace in a can so I do not have to dirty up my spray gun to shoot small parts after balsting?
 
I agree with aatlass. Choose your media wisely. I did my frame with silica(banned) and am contemplating the rest.:beer:
 
If you want to check out stripping, ask someone who paints aircraft. They have to be stripped for every paint job, and the aluminum will not hold up to any blasting. I had it done to my '47 Ford way back in high school, may she rest in peace. Trivia: when I sold it the buyer really wanted to trade me for his 40, but I wanted a newer vehicle. I heard he wrecked it later.

47ford.jpg
 
How well do those wheels by 3M work?

I have seen those in the parts stores and wondered if they were worth anything..
 
Baldboy-

I would have to say if you can afford it, sub it out. This is one of the messiest jobs on a vehicle. Sand everywhere... absolutely everywhere. I would sub it out and have it done right the first time and be able to keep moving forward on your project.

I have found very few rigs actually need totally stripping. I enrolled in an auto body class at the local tech school and painted a car with great results and minimal investment.

Just my .02

Rezarf <><
 
You need to spary your rig with a primer sealer after it has been blasted. Even being exposed to the air, it will start to rust.
 
I am in the process of getting my hard top ready so it can be media blasted. The guy is going to charge me 45.00 an hour to do he said it will probaly take about an hour and a half to do.
 
Etching primers

I have the same question about etching primers Hugh Heifer what is the difference. I do know you can get it from http://www.eastwoodco.com in the rattle can
 
It is my inderstanding that etching primers generally have to be top coated soon after laying them down. I thought that a good epoxy primer could go on after smothing and you would be good to go to paint. I may be mistaken. Maybe Rezarf can add $.02 more. Also, many epoxy primers are two part (catalyst and compound) I hate 2 part stuff. I never seem to mix it right. (Just ask my wife why I only drink half a Coke and the new bottle of Jim Beam is gone!) Then there is POR-15. A whole nuther thing. This inhibits rust but, apparently does not act as a primer. It is still supposed to be top coated with a primer/sealer.
 
Call your local powder coaters. they will have several media guys on speed dial.

If you won the lotto, powder coat all the body panels and prime and paint over that.

I did a chemical spray on everything after medis then it all got epoxy that was was the same tint as the paint. PPG color build I think is what they call it.
 
$600 to blast and powder coat the frame.

$650 to media blast + epoxy primer everything but tub, two side doors and windshield frame. (hood, fenders, amb doors, tailgate, HT side panels, grill, hinges, steps, trans tunnel, ...)

If I did it again I'd use epoxy primer on the frame. Same cost.
 
Primers

So I happen to be in a auto body supply today picking up some self etching primer. A guy asked what I was doing and I told him I was sand blasting a few small parts and he asked what I was going to top coat the self etching primer with. I said I wasn't sure. He said DO NOT use and epoxy primer becasue the two will have a reaction that will casue nonadherence. He said use a "regular" primer. (By this he meant a one part.) He said you can use a good epoxy primer or self etching primer on sand blasted parts but do not compine the two. After, sand and lay two or three coats of regular primer sanding between each then base coat clear coat.

POR and Zero Rust take the place of either self etching primer or epoxy primer and should be coated after as I mentioned above.

That was my education for today from an old man who looked like he knew what he was talking about while buying stuff and an autobody supply store. THey guys at the counter did not attempt to correct him.
 
Back
Top Bottom