Lexus LX470 retrofitted with Lexus SC430 projectors.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I did my upgrade with the SC430 projectors. Best upgrade so far on the lex! Thanks @silverbullitt
 
@6H05T the first pic is without the light bar and without fog lights..

20201018_193417.webp


20201018_193615.webp


20201018_193703.webp
 
crazydeelz said:
@6H05T the first pic is without the light bar and without fog lights..

Was it difficult to get the lense off the housing? Basically all you need is the SC projectors with the ballasts? No additional parts?
Click to expand...
 
It's not that hard. Once the headlight assembly is off, you'll need to bake the headlight in the oven for about 7-8 mins at 225F to soften up the glue. The bracket that holds the projector will need to be cut to fit the sc430 projector. Alternatively, there's a bracket that supports the morimoto projector if you decide to use a morimoto projector. You'll need some more adhesive to attach the lens back and also some rubber dust covers. The size is 83 mm wide, but 80 mm might work better if they are rubber.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom