Leaky Wheel cylinder

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 7, 2003
Threads
295
Messages
2,786
Location
Cincinnati
I've got a leaky wheel cylinder on the back. Should I just replace the one thats leaking or replace all 4? Any brands of choice? Seems like ccot has a set of 4 for like 110$
 
Lets see, a $6.00 NAPA rebuild kit and an afternoon and $104 toward a PS conversion or $110 and a full day or two and Take $110 OUT of the PS fund hmmm.... Honey? I'm going to NAPA, be right back!

I just rebuilt ALL EIGHT wheel cylinders and so far so good. Unless you have really badly pitted cylinders a quick hone and a $6.00 kit will last a long time. If you never want to have to hone again and you want to leave your Cruiser bone stock then have the cylinders lined with brass inserts that won't corrode. http://www.whitepost.com/brake.html About $50 a cylinder but that's for a lifetime of no more replacements!
 
I replaced just my 1 leaking cylinder a year or so back and have no problems. $25 bucks at toyota w/ discount.
 
I always vote to rebuild whenever possible

Maybe it is because I was raised on the mission field in Indonesia. Or maybe I'm just cheap, but I always rebuild anything that can possibly be rebuilt. I rebuilt all 8 wheel cylinders on the 40 with the NAPA kits and the brakes have been strong enough to throw me through the windshield ever since.
And yes with all drums you can get them adjusted to brake very well once you get the feel for the adjusting process.
Just wish now that the 62 braked as well as the 40. I'll have to address that sometime pretty soon! :rolleyes:
 
Back
Top Bottom