Is this stock?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2019
Threads
63
Messages
330
Location
BOISE, ID
I’m replacing u joints today and on one of the shafts it looks like the u joints have been replaced and feel good so planning to leave them alone. However looking at the shaft it has some weird welds that I’m guessing maybe aren’t original? Also looks like grease is coming out of the end of the shaft underneath the joint. Is that possible? It almost looks like that end cap underneath isn’t sitting even...almost like one side is pushed in, or out more than the other side
82B615F7-3BFB-4111-BDC4-F8BD628F25B3.jpeg
594AECC0-D801-40F2-A3AA-8B0B766986BC.jpeg
43EBAA67-A690-4AFE-AB48-319ED9308705.jpeg
 
@lmajor32

Is your FJ40 stock? Month/year? Transmission original?

The grease coming out of the welch plug is from the zerk that lubricates the splined slip joint. Too much grease, you pop the welch plug out.
Thank you...had no idea. So from what I'm reading its maybe a 36mm plug? Assuming I'm going to have to pull the thing entirely apart...u joints etc, to fix it.
 
Back
Top Bottom