ID this steering box please?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 21, 2017
Threads
48
Messages
462
Location
Toronto
I am going through every component in my steering. I had some slop but also mindful no maintenance was performed on the steering in 2 decades...

This is a 1974 FJ40 that I bought with power steering installed. I do not believe it is stock, but I know nothing about any conversion prior to my ownership. I would either rebuild this myself or send out to someone reputable to rebuild and return.

Any help id'ing this and any pertinent information would be greatly appreciated!

John

20181118_160611.webp


20181118_160626.webp


20181118_160638.webp
 
Could be a mini tuck box or a FJ40 power steering box. The angle of the mounting pad will tell the story. You’ll need to post more pics.
 
The mount is for a mini truck box. Stock mount was not angle iron pieces welded together and was rivited to the frame. The mounting plane for the mini truck box is different than a fj40 box. The internal parts are the same.
 
Thanks! So an embarassing question...when people say "minitruck" are they referencing what years of pickup?

Want to get the right rebuild kit or send it the right place...any place rebuild these and the pumps? I was West Texas referenced doing the box rebuild for $180 on their site...
 
Thanks! So an embarassing question...when people say "minitruck" are they referencing what years of pickup?

Want to get the right rebuild kit or send it the right place...any place rebuild these and the pumps? I was West Texas referenced doing the box rebuild for $180 on their site...

See pinheads reply above.
 
Would this then likely be a minitruck 79-85 power steering pump? Because it looks nothing like a picture of what was represented as one...

Thanks!

20181121_204454small.webp


20181121_204458small.webp


20181121_204502small.webp


20181121_204526small.webp
 
That's a standard Saginaw pump, not Toyota.
 
If I wanted to revert to Toyota would a pump like this be right? Advertised as FJ40 and 60 on fleabay...$USD235...

Would that match my minitruck box ok? Any better Toyota choices?

s-l1600.jpg
 
Some pictures I have gathered. First is a mini truck (79-83 pickup) second is OEM FJ40 power steering. You can see the castings are different where the mounting is. The FJ40 casting has the input shaft pointed higher than the mini truck. Your box is from a 79-83 pickup, the return fitting on the mini truck box changed size in 80 or 81.

mini.webp
oem power.webp
 
These are the heat shields, this is the manual box heat shield with mounts:

manual shield mounts.webp



This is the heat shield for the OEM FJ40 box, you can see the bottom mounting holes are different due to the longer casting. The manual box heat shield mounts can be easily modified to install the manual heat shield on the power box.

oem power heat shield.webp
 
Thanks, any knowledge on the use of that pump I posted? The saginaw pump was working but I want to revert to Toyota...is that fleabay one or another a better choice? The box has to handle bigger wheels amd tires...

Thanks!
 
If you are going with large tires and off road I think the Saginaw PS is what you want. I have the Toyota mini truck PS on my DD with 31s. The feel is good but probably not strong enough for larger tires. Others can attest to that.
 
Modified manual heat shield bracket on power steering gear, the rear/bottom mounting hole/ear is moved closer to the front
mounting bolt to fit the shorter bolt spacing:

20181209_130750.webp



Heat Shield Mounted:

20181209_131233.webp


This box was created with a new factory PS housing and mini truck innards along with a seal kit from Mr. Toyota. If I get a rainy day over Christmas, this is going in my 73.
 
Back
Top Bottom