- Thread starter
- #121
WTB:
60 series rolling chassis. Need it for a diesel mock up, no need for a good body.
60 series rolling chassis. Need it for a diesel mock up, no need for a good body.
For Sale @ High Desert Cruisers
- Thread starter Ruadhrigh
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Sorry for the bad info...just keepin' an eye out for you guys.
Please pass on any leads Jim. I wish they had a system that would trigger e-mails when they got a specific model in inventory. They turn the inventory in the foreign car area about every 6 months so new junkers come in every day.
FYI, there are about 10 4Runners but they were picked over pretty good. The trip was not wasted because I got a few Taco parts.
-Mike-
What's your time frame Rory? I've got one (1985) but it still has a lot of other things on it that I want to keep or try to Ebay. I could work on getting it stripped of all the useful stuff. Only the inner fenders are left up front. The engine's going to be the hardest thing for me to find a home for around my dad's place. I want to rebuild, desmog and install in my '72 40.
- Thread starter
- #124
Well... it is for a friend. Right now he is a little busy with remodeling the bathroom, but we were talking about working on it for the Winter shutdown. That is kinda short notice for you though.
I don't think I can help you out that soon.
Well...
I have to give up the ghost. I posted my 40 on craigslist. I have too many bills and not enough income. The 40 was great fun, but needed more to be as comfotable as I'd like it. We will keep the 80 and hopefully get another 40 when Molly has graduated.
I know the price is high, but I'm kinda fishin to see what bites
http://albuquerque.craigslist.org/car/473711993.html
I see it sold. Anyone we know?
Tiedown Straps/ Oh S#!t Handles
I had 10 of these made so I can have something to clip/tie cargo straps and nets to in the cargo area of my 60. I'm keeping 4 of them. I think they would also make good handles for pulling down hatches that are too high for short people (nobody in particular) to reach, or 'Oh S#!t' grab handles. The round hole is a little over 1/4" diameter. The metal is 1/8" thick. It's not obvious but the 1" webbing is sewn so that it makes one large loop that slides freely until the overlapped and sewn section comes to the slot in the bracket. It'll pass through but it's a little tight. The claimed working load of the bracket is 335 lbs. $5 to HDC members and friends as long as you don't want me to mail them. $10 if you want me to ship them.
-Marc
I had 10 of these made so I can have something to clip/tie cargo straps and nets to in the cargo area of my 60. I'm keeping 4 of them. I think they would also make good handles for pulling down hatches that are too high for short people (nobody in particular) to reach, or 'Oh S#!t' grab handles. The round hole is a little over 1/4" diameter. The metal is 1/8" thick. It's not obvious but the 1" webbing is sewn so that it makes one large loop that slides freely until the overlapped and sewn section comes to the slot in the bracket. It'll pass through but it's a little tight. The claimed working load of the bracket is 335 lbs. $5 to HDC members and friends as long as you don't want me to mail them. $10 if you want me to ship them.
-Marc
Healthometer Physician Balance Beam scale with height rod
I have a balance beam scale seen in many doctors' office. It's similar to this unit. It has a height measuring rod too. My model is 502KL PRO Series and the usage was minimal. Owners manual and receipt are included.
Haven't unpacked it from the original packaging since we moved so it needs to go. Asking price is $75/OBO.
Thanks.
I have a balance beam scale seen in many doctors' office. It's similar to this unit. It has a height measuring rod too. My model is 502KL PRO Series and the usage was minimal. Owners manual and receipt are included.
Haven't unpacked it from the original packaging since we moved so it needs to go. Asking price is $75/OBO.
Thanks.
Saw this ad in the Sandia Lab News:
'75 Toyota Land Cruiser FJ40, 2F engine, 4-spd., winch, hard/soft tops, good condition, $6,900 OBO. 271-1413."
'75 Toyota Land Cruiser FJ40, 2F engine, 4-spd., winch, hard/soft tops, good condition, $6,900 OBO. 271-1413."
Received via email:
====================
A great project car! 1975 Toyota Landcruiser. Doesn't run, needs restoration. Also has soft top and doors. Can be seen in Rio Rancho. $950. 505-994-4559. Dierdre Segien.
======================
====================
A great project car! 1975 Toyota Landcruiser. Doesn't run, needs restoration. Also has soft top and doors. Can be seen in Rio Rancho. $950. 505-994-4559. Dierdre Segien.
======================
FREE! OEM FJ40 bucket seats, vinyl is not bad, brackets need work/replacement.
Call me to pickup after Sunday 16 Dec, 514-9689 or ibrito@unm.edu
Call me to pickup after Sunday 16 Dec, 514-9689 or ibrito@unm.edu
I think Rory has been looking for a pair of seats for his FJ40.
-Mike-
-Mike-
- Thread starter
- #133
I was but I've already taken at least three pairs of seats from Isaac and haven't done anything with them!
Tire chains
I picked up two sets of these, and I can only use them on the rear due to the IFS when we tried to put them on during the snow run.
Includes a pair of chains, and two pairs of tie downs.
Paid $75 for the chains, and $6.99 for each pair of tie downs.
Fit the following according to the outside of the package:
12-15LT
285-75-R16
315-70-R16
31x13.5-R15
33x12.5-R15
33x12.5-R16.5
$65 obo.
I picked up two sets of these, and I can only use them on the rear due to the IFS when we tried to put them on during the snow run.
Includes a pair of chains, and two pairs of tie downs.
Paid $75 for the chains, and $6.99 for each pair of tie downs.
Fit the following according to the outside of the package:
12-15LT
285-75-R16
315-70-R16
31x13.5-R15
33x12.5-R15
33x12.5-R16.5
$65 obo.
If they will fit 285-75-R16 they will also fit 33x11.50-15.
FREE! OEM FJ40 bucket seats, vinyl is not bad, brackets need work/replacement. No Headrests
Call me to pickup , 514-9689 or ibrito@unm.edu...
or they can be found at the westside dump after this weekend!
Call me to pickup , 514-9689 or ibrito@unm.edu...
or they can be found at the westside dump after this weekend!
MAF U Bolts
New U-bolts that came with my lift kit for my 40. I decided later to buy the u-bolt flip kit, so I do not need them. I believe they are for the E-07/80 since ordered them for my '71 40. Steve from MAF said he would give me some credit, but by the time I box and ship them back who knows. Thought I would see if anyone here wants them for about half price ($25).
Rudy
New U-bolts that came with my lift kit for my 40. I decided later to buy the u-bolt flip kit, so I do not need them. I believe they are for the E-07/80 since ordered them for my '71 40. Steve from MAF said he would give me some credit, but by the time I box and ship them back who knows. Thought I would see if anyone here wants them for about half price ($25).
Rudy
1977 FJ40 For Sale, $1500, Pecos NM
Howdy,
I found this 40 for sale in Pecos the other day. I was thinking about buying it but decided against it and thought I would try to help the guy sell it. I wanted to post it here first before on the main forum classifieds. He said it ran a year ago when it was parked. He said it had a recent engine rebuild. Its rough but the price isn't bad. He is asking $1500. The guys name is Josh and his number is 505-920-0682.
Adam
Howdy,
I found this 40 for sale in Pecos the other day. I was thinking about buying it but decided against it and thought I would try to help the guy sell it. I wanted to post it here first before on the main forum classifieds. He said it ran a year ago when it was parked. He said it had a recent engine rebuild. Its rough but the price isn't bad. He is asking $1500. The guys name is Josh and his number is 505-920-0682.
Adam
Last edited: