Fj40 headers?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

these will warm your burritos while adding some torque

IMG_1519.webp


IMG_1520.webp


IMG_1521.webp
 
I did the 3FE header as well. Works fine so far, but I don't have that many miles on it yet. My single regret was not getting them (and the rest of the exhaust) coated.

IMG_2247.webp
 
Yes Marks.....very thick flange- no leaks- nice torque and the Los Angeles Funkadelic 70s hippy color scheme appear like magic hearkening to Marks Long Haired past. ;) Retro- funk- period correct headers.......cant beat em!
 
My first headers were a set of old, used SOR headers. I don't even remember what the issue was, but I had clearance issues, and besides, I couldn't keep them snugged down, no matter what I did.

For the past 10 years or so, I have been using an old MAF header that I had machined. It is rock solid, and no leaks. Ugly as hell, but if I wanted pretty, I wouldn't be driving a 40.
 
I don't know much about FJ40 headers, but I have some experience with ceramic coated headers on two of my cars, one of them a race car. I've found that proper curing is essential to having it last. Needs to be warmed up gradually, stay at idle for about a half hour, let it cool, and repeat. I had a set of ceramic coated headers on my race car that went straight to dyno tuning, got too hot too fast, and the coating failed within about 30 hours of race use. Did a proper cure when I had them redone, and they're holding up well at 50+ hours. Also did a proper cure on a set of headers for a street car, and it's been fine for almost a year of regular use.
 
Nothing at all against the companies you referenced, but those are smaller companies who have evidently found small Header manufacturers who are willing to work with their small quantities. At Downey we never had that luxury because we sold more Headers than all those companies combined, and unfortunately Downey's original Header supplier is not willing to work a better "quantity" deal for Mark. Downey Headers are more labor intense than other designs, consequently suppliers are not willing to build smaller quantities- - -I hope this problem does not continue to plague Mark, even after he regains his warehouse capacity..
The orig supplier will make whatever you pay them to make.
The retail mkt will pay what you might ask(given the quality and the availability)The trick is to get the retail cost to what the customer might be willing to pay---easy enough to find out--just ask--Current cost would certainly be higher than in the past, but if the quality is equal or better than it was, then you might just be able to get 20-30% more now.
Guys do "group buys" now frequently--seems like a good candidate for this--
 
My first headers were a set of old, used SOR headers. I don't even remember what the issue was, but I had clearance issues, and besides, I couldn't keep them snugged down, no matter what I did.

For the past 10 years or so, I have been using an old MAF header that I had machined. It is rock solid, and no leaks. Ugly as hell, but if I wanted pretty, I wouldn't be driving a 40.
I got a set from JT prob 5-1/2 yrs ago. Had them machined with the intake to equal flange thicknesses. Blasted them,marine-cleaned and painted w/VHT Alum paint(2 coats) Followed curing instructions. They are still on, no rust, no leaks, no more vapor-lock five years later(daily driver)
 
I have a brand new header from JTO that I can't even convince myself to put on craigslis. I would feel bad for the buyer. I decided to fork out the cash for the SOR ceramic ones. They fit perfect with no issues. My wallet was empty after paying for them though!
 
So, I too am in the market for replacement headers...from what I read on this post, I see "Downey" headers probably were the "best" except they went out business in 2009. One person did not like the SOR.com headers. I've learned the thickness of the flange is critical - the thicker, the better...but you have to machine the exhaust and import manifold to the same thickness so that match and bolt up without leakage. I see something on ebay...which I hate to purchase without a referral.... Performance Exhaust Header Toyota Land Cruiser 1F 2F FJ40 45 FJ55 FJ60 Manifold | eBay So with the limited availability, has anyone had good experience with the SOR ceramic headers?...I am really at a loss as what I can purchase today, bolt up knowing that it might be another year before this beast gets fired up. Thanks in advance!
 
When I am finished renovating the new offices and reorganizing the shop, I will see where I stand space-wise and finances to evaluate this project again. Not before. All the time I took the lead on this, I had the use of the warehouse I no longer have. Storing a full production run of these takes room I do not currently have.

Candidly, I am also not comfortable with the changing dynamics of the marketplace.
If you ever consider having them make again I am in the market for one...Mine is still good,but nothing wrong with having quality spare parts....Mike
 
Just FYI. I started out with the JTO headers. They are crap. Ended up forming out a fortune on the SOR ceramic headers couldn’t be happier with fit and finish. They worked out to be the perfect finish after I had intake machines flat. I also used a reflex gasket. No leaks.

BTBUILD
 
Back
Top Bottom