ARCHIVE February LED Light Bar Group Buy

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

For those wanting simplicity in wiring, buy the harness mentioned in one of the earlier posts, but you'll need to use the female plugs from here:

http://www.ebay.com/itm/280980948055?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

and your own wire to make pig-tails that will connect the lights to the harness. Do a good job soldering. Use adhesive style shrink tube and you have a water-resistant plug and play lighting system.

Just checked the Retrofit Source link again, and there's an option for a 9006 female connector.

Am I missing something?
 
These are the "female" ends on the harness and the internals I was referring to.

ForumRunner_20130315_201347.webp



ForumRunner_20130315_201404.webp

ForumRunner_20130315_201347.webp


ForumRunner_20130315_201404.webp
 
The sockets dictate the plug type (9006,9005,H1, etc). The pins dictate male or female. The pins that are on the male connector are flat metal pins (in the "female" plastic socket. The female connectors are the square pins ( in the "male" plastics socket, it will have a grommet to seal around the plastic part. It's confusing. The relay harness is a 9006 HD relay, it will have input to tap into your switch of high beam stalk and two outputs for the lights.

You will need male sockets for the lights. The flat pins. If you are tapping into the OEM high beam circuit you will need a y-splitter.
 
Thanks for being patient and holding back the flaming guys :)

Paperwork woes at the beginning of the week, and a pallet full ($10,000) of lights showed up yesterday destroyed, like someone dropped the pallet off of a building.

The joys of running a business :)

Working on invoices tonight. I will not stop until every last one is sent out.

**NO ONE MISSED OUT ON THE GROUP BUY! IF YOU PM'ED/EMAILED/CALLED ME WITH YOUR ORDER, YOU'RE IN.**

:crybaby:

Is that going to delay the lights shipping?

this.. /\/\/\

we still on target?....thanks!
 
Same question... Is this still the plan?

(The lights will ship mid-end of March. I'll be placing the order on March 1, they should be at my door by March 14, and I'll be shipping them immediately. I'll do my best to expedite the process.

-Troy)

Thx!
-Daniel Kent
 
Did we get scammed? This guys joins Sept 2012 and now that its shipping time he stops responding to the board after "an entire pallet of lights" get damaged.
 
Last edited:
My personal thoughts are we're fine and he's legit, I just think he's a bit overwhelmed and possibly this was more work than anticipated. Just my 2 cents and crossing my fingers. ;)

-Daniel Kent
 
Did we get scammed? This guys joins Sept 2012 and now that its shipping time he stops responding to the board after "an entire pallet of lights" get damaged.

I don't know that we need to go there yet...let's give Troy a chance to respond..everyone's busy, so let's give him a chance.
 
I've sent him two PM's in the last week with easy questions to answer, he hasn't responded to either. He had been very quick to respond until the GB was over and money was in his pocket. But I agree, I don't think we got scammed...he's just doing something else, or something.
 
Last edited:
This^^

Now when he reads this he's going to be even more overwhelmed:) lol

Yes, and the pressure continues to build every day.

I didn't expect this group buy to turn out as big as it did.

As a result, things moved along slower than I had anticipated.

For this, I apologize. I apologize deeply.

I'm still pushing to get these lights out as soon as humanly possible. I won't sit on any inventory once it arrives at my door. It'll be out the next day (or same day, if there's time).

I really appreciate everyone's patience through this. Rest assured that I'm not off in Mexico sipping Pina Coladas on the beach.

-Troy
 
Guys I wouldn't worry about Troy. He is legit and a MUD Fanatic. He lives down the street from me so no worries.. I know where he lives.. ;) He is a one man show so lets cut him a little slack!!! Ordered my set today!!

Cheers and happy mudding!
 

Users who are viewing this thread

Back
Top Bottom