Factory Locker Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

No. The computer will need it in low before it will lock.
 
Is it possible to lock the rear axle with the transfercase in high? (and unlocked)

Thanks in advance

Yes but you will need a CDL switch and a pin 7 modification. Information on both can be found in the FAQ or on Slee Off Road's website under the tech article section. You can also buy the CDL switch from Slee, CDan or another Toyota dealer. The modification isn't difficult.
 
if your center diff is open, wouldn't the torque transfer up to the front wheels?

search 7-pin mod for some info
 
Yes but you will need a CDL switch and a pin 7 modification. Information on both can be found in the FAQ or on Slee Off Road's website under the tech article section. You can also buy the CDL switch from Slee, CDan or another Toyota dealer. The modification isn't difficult.

Technically locking the rear locker in high only requires the CDL switch. Once the centre diff is locked via the switch in high range, the rear (and front) can subsequently lock.

The Pin 7 mod only stops the automatic locking of the centre diff when the transfer case is shifted into low range
 
Yes but you will need a CDL switch and a pin 7 modification. Information on both can be found in the FAQ or on Slee Off Road's website under the tech article section. You can also buy the CDL switch from Slee, CDan or another Toyota dealer. The modification isn't difficult.

I have been reading up on this. From what I have read, I still cant engage the locker without the diff being locked.

The pin 7 mod will allow for a 4 mode operation (CDL High open/locked, and CDL Low open/locked), but nothing about engaging the diff locks with in open CDL.

Am I missing something?
 
I have been reading up on this. From what I have read, I still cant engage the locker without the diff being locked.

The pin 7 mod will allow for a 4 mode operation (CDL High open/locked, and CDL Low open/locked), but nothing about engaging the diff locks with in open CDL.

Am I missing something?


Sounds correct.

Curtis
 
It was a passing thought for the boat ramp.

Locking just the rear won't help that much. Locking the center means that at least one front and one rear tire will spin, giving you a push/pull effect.
 
I would disagree....I've seen some 2wd locked trucks go just as far as 4wd unlocked. I've also seen the difference that a locked rear axle can make on a slippery boat ramp, it sometimes makes all the difference between needing help to get out and being able to pull out by yourself when all you've got is a 2wd truck, and sometimes even with a 4wd truck.
 
I've seen some 2wd locked trucks go just as far as 4wd unlocked.

Agreed.

BUT...

These are AWD trucks; very different from standard 2WD. If there's slippage in the rear with an open CDL, all the torque will go to the front of the vehicle, which, on a slippery boat ramp, wouldn't be much help.

Whew.
 
Just lock 'em all. :meh:

I've done that a few times on dirt ramps. Last year at Powell we recovered our boat at the beach where all the houseboats provision. My wife backed the 80 in and there were a couple young guys giggling about how stuck she was gonna get and how pissed off I was gonna get. She locked it up and popped right out. Their lower jaws were bouncing off their chests...:lol:
 
I've done that a few times on dirt ramps. Last year at Powell we recovered our boat at the beach where all the houseboats provision. My wife backed the 80 in and there were a couple young guys giggling about how stuck she was gonna get and how pissed off I was gonna get. She locked it up and popped right out. Their lower jaws were bouncing off their chests...:lol:


Nice.

Reminded me of one of Doug's old posts:

https://forum.ih8mud.com/80-series-tech/103834-its-ok-lock-up-diffs-honey.html

Curtis
 
An open diff is an open diff, center or otherwise, it will always divert the power to the wheel or wheels that have no traction. That's it's job. Get a center diff lock switch, do the pin 7 mod and lock the center diff on the boat ramp. It will give you exactly what you are asking for, if not what you want.
 
Back
Top Bottom