- Thread starter
- #81
Last edited:
Build Engr Build Thread
- Thread starter EngEngr
- Start date
-
- Tags
- build build thread
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #82
More pictures of install. Tucked the rear reservoir into this outboard corner. Not terribly impressed with the front mount, will probably make some aluminum cnc part in the future.
Last edited:
- Thread starter
- #83
Wife suggested we get new seats for our 3500 mile road trip
Last edited:
- Thread starter
- #84
Dobinson MRA settings for mostly stock weight. Still have front and rear sway bars.
Front: 4 low speed, 1 high speed, 1 rebound
Rear: all set to 1s
Front: 4 low speed, 1 high speed, 1 rebound
Rear: all set to 1s
- Thread starter
- #85
Gearing up for 3500 miles and 52+ hours in the car with my wife, 4 year old daughter, 2 year old daughter, 5 month old son, and a tent. A little different than the boundary waters and remote backpacking I'm use to but here we are using my paternity leave for a 2 week national park grand tour.
Badlands 1 night
Yellowstone 4 nights
Tetons 1 night
Salt Lake 3 nights
Zion 2 nights
Bryce/Capitol Reef 1 night
Moab/Arches/Canyon Lands 2 nights
Home to Iowa 2 days
Camping 8 nights, cabins and Air BnB for 6
Badlands 1 night
Yellowstone 4 nights
Tetons 1 night
Salt Lake 3 nights
Zion 2 nights
Bryce/Capitol Reef 1 night
Moab/Arches/Canyon Lands 2 nights
Home to Iowa 2 days
Camping 8 nights, cabins and Air BnB for 6
Sounds like an awesome trip
- Thread starter
- #87
This family recommendation comes from my 4 year old who wanted steps.
White knuckle sliders. Thanks for getting them on time @white-knuckleoffroad !
10deg with full dimpled top plate
Thank you tekton long reach flex head ratcheting wrenches
White knuckle sliders. Thanks for getting them on time @white-knuckleoffroad !
10deg with full dimpled top plate
Thank you tekton long reach flex head ratcheting wrenches
Last edited:
- Thread starter
- #88
Family recommendation for a passenger seat belt that doesn't lock up every time you try to hand something to the kids.
Got a set of seat belt planet installed. Needed the short buckle and drill out 11/16 to fit the factory 17mm shoulder bolt.
Got a set of seat belt planet installed. Needed the short buckle and drill out 11/16 to fit the factory 17mm shoulder bolt.
Last edited:
- Thread starter
- #89
Last edited:
- Thread starter
- #90
4,140 miles with our 4 yo, 2 yo and 6mo old. Badlands, Yellowstone, Tetons, Zion, Bryce, Capitol Reef, Canyonlands, Arches
7 nights in a tent 8 nights in a cabin.
Thanks @cruiseroutfit for the spare spindle
Scheel mann seats were amazing after 50+ hours in the car.
Dobinsons MRAs were awesome
7 nights in a tent 8 nights in a cabin.
Thanks @cruiseroutfit for the spare spindle
Scheel mann seats were amazing after 50+ hours in the car.
Dobinsons MRAs were awesome
Last edited:
great trip, working on getting my rig squared away for a big family trip out west.
- Thread starter
- #92
Spending most of my resources and time on the 22RE turbo project.
Land cruiser clipped 255007 as the daily. Wondering if I need to LS swap it and strip the interior for sound deadening
Land cruiser clipped 255007 as the daily. Wondering if I need to LS swap it and strip the interior for sound deadening
- Thread starter
- #93
Roof rack delete, +1000 for rust free vehicles.
Front runner load bars. Yakima 18ft storage incoming... Future awning? RTT?
Timbren bump stops front and rear from @crikeymike
New throttle cable, old was down to metal, trying to battle a random hot high idle that goes away when I manually close the throttle
Front runner load bars. Yakima 18ft storage incoming... Future awning? RTT?
Timbren bump stops front and rear from @crikeymike
New throttle cable, old was down to metal, trying to battle a random hot high idle that goes away when I manually close the throttle
- Thread starter
- #94
BWCA 2024
58 miles and 37 portages in 4 days
58 miles and 37 portages in 4 days