CX racing header and downpipe

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Even if she did, good luck finding one. lol.

Yeah in an ideal world, round pipe to oval flange you size the pipe up larger than the oval, never smaller. lol. But it is the 1FZ, we get no love. lol
 
Does anyone have any info on the Pacemaker header from AU? It looks to be better quality, but doesn't have any price listed on the website.
 
Well I finally got the time to get my exhaust all done. Just waiting on the O2 Sim to arrive. I need to either modify the stock manifold heat shields or fab some up as well.
You guys were talking earlier on ceramic coating, does it make that much of a difference to underhood temps? I dont care too much about the mild hp gain, this thing is slow and Im ok with that.
 
Any experiences are exactly what I am looking for. I took it for a drive Sunday when I got it done. It was 30 deg.C out, for us guys that use a proper temp unit ;)
When I got back I could barely touch the underside of the intake tube...
 
Mine is coated in silver silicone powder coating, not sure it helps with temps much. Ceramic is more reflective so it is probably better. I definitely could use some heat shields too. Did you guys find an easy way to attach the factory shields? I'm really tight to the bottom of the SC so I might fab up something. I haven't gotten an O2 sensor code yet. Have for EGR because that's blocked by the header.
 
Any experiences are exactly what I am looking for. I took it for a drive Sunday when I got it done. It was 30 deg.C out, for us guys that use a proper temp unit ;)
When I got back I could barely touch the underside of the intake tube...
30 degrees? You must have frozen your ass off!:flipoff2::flipoff2::beer:
 
Almost shorts weather :)
Will i welded bolts onto the headers and hacked up the original heat shields, actually turned out pretty good. Will get some pics when they get back from coating.
 
Almost shorts weather :)
Will i welded bolts onto the headers and hacked up the original heat shields, actually turned out pretty good. Will get some pics when they get back from coating.
That's a great idea, wish I'd thought of that
 
20151031_203334.webp
My cx header has definitely given me some headaches, and still has a frame interference vibration issue, but for the money I think it will be pretty good. I high temp coated mine (1200 degree powder coat) and I'm not driving it this winter, so I believe corrosion will be a non issue. The truck sounds totally hot rod rodded with the header and 3 inch exhaust and pro flow muffler, which I am just fine with! For now, I have made a heat blanket out of ceramic material from McMaster Carr and it's held up great, definitely function over form though. Modding the header tubes to make my supercharger work sucked but shame on me for not checking to see if it would work with one. Here's a bottom view of the coated header with the blanket above it
 
Yeah, not sure what the fix is yet, possibly BFH to dent the header for clearance. Lame, but effective. So far behind on other stuff, including a winter vehicle, this cruiser may not see much done til spring.
 
I have the cx racing header on my 80 and it lacks the port that directs the exhaust back into the egr system so i was throwing a code until i did the resistor mod. Now i have a code for the lack of a 2nd O2 sensor. Also i noticed much higher engine compartment temps until i wrapped them with the lava rock type header wrap. Just fyi.

Sent from my Nexus 7
 
Going on 2.5 yrs now with the CX racing header......still not bad, both flex couplers blew out at the welds last week, I hacked them off and welded on new Vibrant flex couplers. Thankfully its half way decent stainless, little prep and burned on the new flex couplers with no fuss. Originally the rear pipe sat on the frame rail and rattles when driving and worse under load, may not be the easiest fix, but i had the original engine mount from 1997, figured they were old and compressed. I replaced just the passenger side engine mount and gained almost a quarter of an inch clearance on the frame rail. The mount was an Amazon special http://www.amazon.com/DEA-A7204-Front-Engine-Mount/dp/B0067UECY2?tag=ihco-20
 
Going on 2.5 yrs now with the CX racing header......still not bad, both flex couplers blew out at the welds last week, I hacked them off and welded on new Vibrant flex couplers. Thankfully its half way decent stainless, little prep and burned on the new flex couplers with no fuss. Originally the rear pipe sat on the frame rail and rattles when driving and worse under load, may not be the easiest fix, but i had the original engine mount from 1997, figured they were old and compressed. I replaced just the passenger side engine mount and gained almost a quarter of an inch clearance on the frame rail. The mount was an Amazon special http://www.amazon.com/DEA-A7204-Front-Engine-Mount/dp/B0067UECY2?tag=ihco-20
That's cool, I'll check that out. More of a sensible fix
 
Going on 2.5 yrs now with the CX racing header......still not bad, both flex couplers blew out at the welds last week, I hacked them off and welded on new Vibrant flex couplers. Thankfully its half way decent stainless, little prep and burned on the new flex couplers with no fuss. Originally the rear pipe sat on the frame rail and rattles when driving and worse under load, may not be the easiest fix, but i had the original engine mount from 1997, figured they were old and compressed. I replaced just the passenger side engine mount and gained almost a quarter of an inch clearance on the frame rail. The mount was an Amazon special http://www.amazon.com/DEA-A7204-Front-Engine-Mount/dp/B0067UECY2?tag=ihco-20

I did both my mounts right before doing the exhaust. Will help with clearance for sure but in the end these just aren't designed right... Im glad you guys posted that you had this issue too, I thought maybe I had something WAY outta line.
When I first installed them they had more clearance on that rear section, no rubbing until after I got back from my first trip.
I am getting pretty tired of hacking this exhaust together, too many other things that are getting pushed back because of it.

I never in my life would have thought that doing a frame over 3" with almost stock sound level would have been such a time consuming endeavor...
Admittedly I sure have learned alot doing this!
 
Last edited:
Back
Top Bottom