a Guncrafter No Name will probably be my next 1911. There were a couple used ones on ar15.com recently that took all the will power I could muster to not buy.
Cottonland Hunting/Shooting Thread
- Thread starter wngrog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
a Guncrafter No Name will probably be my next 1911. There were a couple used ones on ar15.com recently that took all the will power I could muster to not buy.
Finished building my .22 SBR.
Finished building my .22 SBR.
Taccom 3g barrel or did you go a different route? I really need to build a 22 upper for my sbr.
Yes. I have been impressed so far. I had originally had a 5.5" barrel, but it didn't always keep my bulk pack subsonic. The 4" has been 100% subsonic, and 100% reliable. No failure to fires or failures to feed. Lightweight (for what it is too). I have the carbon fiber version. I am running a Geissele SSA-E trigger with a JP lightweight trigger and hammer spring. Its the bees knees.
Last edited:
This one is a CMMG bolt with a Taccom collar.
It better be the bee's knees. That trigger cost more than half the guns I own.
It is. Try one
For Beretta 92 series fans.
http://wilsoncombat.com/new/handgun-...p#.VFg0WLstDwo
Beretta 92G Brigadier Tactical pistol
Brigadier configuration with heavy duty slide
G configuration ambidextrous decocker only
4.7” Stainless match grade barrel with recessed target crown
Extra tight fitting tolerances for improved accuracy
All steel components (decocker, trigger, magazine release, guide rod)
Oversize magazine release with checkered pad
Checkered frontstrap and backstrap
Beveled magazine well
Rounded trigger guard
Rail for mounting light or laser
Elite skeletonized hammer
D hammer spring
WC rear Battlesight and tritium dovetail front sight
WC steel fluted guide rod
WC G-10 grips with WC logo medallion
Special serial number range with WC prefix
Ships with 3 sand resistant 15 round magazines
IDPA Stock Service Pistol approved
Initial run of 1,000 pistols
Available exclusively from Wilson Combat or Wilson Premier distributors,
MSRP $1195.00. In stock for immediate delivery
http://wilsoncombat.com/new/handgun-...p#.VFg0WLstDwo
Beretta 92G Brigadier Tactical pistol
Brigadier configuration with heavy duty slide
G configuration ambidextrous decocker only
4.7” Stainless match grade barrel with recessed target crown
Extra tight fitting tolerances for improved accuracy
All steel components (decocker, trigger, magazine release, guide rod)
Oversize magazine release with checkered pad
Checkered frontstrap and backstrap
Beveled magazine well
Rounded trigger guard
Rail for mounting light or laser
Elite skeletonized hammer
D hammer spring
WC rear Battlesight and tritium dovetail front sight
WC steel fluted guide rod
WC G-10 grips with WC logo medallion
Special serial number range with WC prefix
Ships with 3 sand resistant 15 round magazines
IDPA Stock Service Pistol approved
Initial run of 1,000 pistols
Available exclusively from Wilson Combat or Wilson Premier distributors,
MSRP $1195.00. In stock for immediate delivery
S&W Model 4006 -- $550
2 -- 11 round mags
blue case
Black holster
40 rounds of hollow point .40
Stainless with night sights
black hand guards.
Just not using it, only fired a few times. It was meant for wife at house and she has problems with the slide and safety.
shopping for a S&W .38 revolver for the wife/house.
Opinions welcome on:
1. price of what I am selling (I looked online for a few minutes and that's what they seem to average)
2. best revolver for melady
2 -- 11 round mags
blue case
Black holster
40 rounds of hollow point .40
Stainless with night sights
black hand guards.
Just not using it, only fired a few times. It was meant for wife at house and she has problems with the slide and safety.
shopping for a S&W .38 revolver for the wife/house.
Opinions welcome on:
1. price of what I am selling (I looked online for a few minutes and that's what they seem to average)
2. best revolver for melady
I'd get a .357 magnum revolver and shoot .38 specials out of it.
Don't get her one of those lady smith airweight's.. they are not pleasant to shoot at all. I'd get her a K-frame snubbie of some sort. I think you are a tad high on the 4006, but shoot for the stars. You might get it.
- Thread starter
- #675
Our friends the Kaderabeks made a banzai run to MS to get Miller a deer hunt and Thames to an Ole Miss game.
We started it off with a doe kill on Friday afternoon with all 3 of them in the stand.
The next day we left at 6:30 for the game. Left Oxford at 3. Pulled up at 5:05 saw motion across the lake as I was unloading car. Grabbed Miller, and with Todd over my shoulder and Julie and Will on the front porch Miller smoked doe #2 standing in the wood line across my pond.
Priceless
We started it off with a doe kill on Friday afternoon with all 3 of them in the stand.
The next day we left at 6:30 for the game. Left Oxford at 3. Pulled up at 5:05 saw motion across the lake as I was unloading car. Grabbed Miller, and with Todd over my shoulder and Julie and Will on the front porch Miller smoked doe #2 standing in the wood line across my pond.
Priceless
So my 100 was broken into at lemuria last week and one of the things they got was my Glock 17. I'm looking for opinions on something to replace it. Want something more compact and easy to conceal carry (it will stay on me all the time now). Also trying to decide if I wanna stay with 9mm or move to .40. Reasonably priced is good too since I'm not getting dick from insurance.
Hate a thief.
This is my everyday carry piece. Very slim and light, shoots smooth and feels solid. Easy to carry concealed. And it slips snug in the 100 between seat and ebrake while I'm driving.
http://www.smith-wesson.com/webapp/...80153_757781_757781_ProductDisplayErrorView_Y
This is my everyday carry piece. Very slim and light, shoots smooth and feels solid. Easy to carry concealed. And it slips snug in the 100 between seat and ebrake while I'm driving.
http://www.smith-wesson.com/webapp/...80153_757781_757781_ProductDisplayErrorView_Y
I saw police trade-in USP .45 for $450
XDS some hate the grip safety I love a 1911 so not an issue for me.