Clutch master (main 3rd bolt)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 5, 2019
Threads
119
Messages
1,044
Location
Bay Area California
I can’t get at this damn bolt ... ideas?
do I have to take off the whole brake master set up to get to it!?! - if so, I might as well just replace all that too the. Huh?

0AF8920F-FCC4-4D0E-B4BA-34892EEBBE2E.webp


B0C44F31-EF1C-4BA9-8944-0A4A9E040C2D.webp


E691FB59-1505-4D6F-BEDF-89DC15B76877.webp
 
Short socket on a swivel with a long extension or a swivel socket if you have one.
 
If you have room, a flare nut wrench will get it loose w/o damage to the bolt head.
 
If you have room, a flare nut wrench will get it loose w/o damage to the bolt head.

tried - can't get it on (one that I have at least - random craftsman 10mm-12mm fn wrench)... might have to find a special small fn wrench - I resorted to my tiniest wrench and still can find the room, but it doesn't have the fn end though
 
Short socket on a swivel with a long extension or a swivel socket if you have one.

I have every possible attachment for my socket - length and swivel..all that...but my socket end is too thick it can’t get around bolt without running into brake booster
 
Master can stay. It was either a small open end or offset box end.

or what @pjohnson said.

found my smallest open end and almost got it but it’s like I need the same size but flare nut end - having trouble finding that one random small flare but wrench to get it. Need to buy one I guess
 
That bolt should not be a big deal to get to. If you are still having trouble, use a shallow 1/4 inch 6 point socket with a swivel and an extension. It will fit . don't bother with wrenches.

Mark...
 
I have every possible attachment for my socket - length and swivel..all that...but my socket end is too thick it can’t get around bolt without running into brake booster
What @3_puppies said and/or what @Krondor said
 
I can’t get at this damn bolt ... ideas?
do I have to take off the whole brake master set up to get to it!?! - if so, I might as well just replace all that too the. Huh?

View attachment 2235907

View attachment 2235908

View attachment 2235909


I have found ONLY a Snap-On 3/8 short chrome thin wall swivel socket , will work here ........

a 1/4" drive one will not get the Torque needed to break loose the bolt , i broke my snap-on 1/4" drive ratchet teeth doing this same job not to long ago


that was my end job experience .........


tight spot for sure
 
I use a 1/4 drive 12mm snap on swivel short socket. Works great, I guess being a German tech for 30 years and buying all snap on tools has got me a little spoiled! But it didn’t come cheap!!
I never buy "sets" but have invested in a 1/4 drive Snap-On set and also have a few longer swivel head 1/4 drive SO ratchets. Most useful tools I have!
 
^^^
This WILL work. Use the 1/4 to 3/8 adapter and if you don’t trust your 3/8 rachet use a 3//8 breaker bar.

If you only have a 1/2 in breaker bar get a 3/8 to 1/2 adapter and use the 1/2 breaker bar. Should not be a big deal.
 
Back
Top Bottom