Borrow my FST grommet hole punch for the cost of shipping.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Bump... Next on deck send me your address
 
I bought one so I don't need it, thanks.
 
:mad:To all, I have it now, I should be done with it in a week. I would have it by this weekend but my twist fasteners and eyelets appeared to have been taken hostage by a pack of invisible giant sized ants that every now and then appear in my garage along with the ghost that rides my road bike, leaves it muddied and never recharges my bike's GPS... They took those twist fasteners along with a plastic jar full of anodized metric bolts, nuts and screws... go figure... SOR came to the rescue just waiting on delivery. :mad:
 
I don't need the tool at the moment. I just want to keep it moving. Thanks. Apologies about the inbox problem. I need to renew my star.
 
I need the tool ...
 
Where's the line, now ?
 
I defer to Cal40 for the line. All I can read below is that I was next. As soon as I'm done I'll send to whomever you guys agree is, or Cal40, is that ok?
 
id like to hop in line, i'll need this in a few weeks..whoever has it next pm me and i will give you my info
thanks
 
bparker said:
id like to hop in line, i'll need this in a few weeks..whoever has it next pm me and i will give you my info
thanks
Click to expand...


I have one I can loan as well. PM me if you want it. I have put some nylon battens in my side curtains and bought some hellacious magnets I will epoxy to them. I'll let you know how it works. Got the idea from Marshall.

Mike
 
Last edited:
Spikestrip, Pighead, Nuclearlemon/treeroot, then bparker, as long as they are ready for it. Thanks for keeping this going. I lost my star and my inbox was full w/o me noticing.
 
Last edited:
Cal40 said:
Spikestrip, Pighead, Nuclearlemon/treeroot, then bparker, as long as they are ready for it. Thanks for keeping this going. I lost my star and my inbox was full w/o me noticing.
Click to expand...

Just mailed mine to bparker so when he's done we'll figure out where he should mail it. Keep us posted on who gets it next. I really like the magnets on mine though.
 
I'm ready for it... So who do I send my addy to ?
 
So who is the last one with the FST tool ?

Bparker, you got it ?
 
Fast Eddy said:
Thread or pics? There are surely some serious magnets around these days. Seems there is a danger of shrinkage (:eek:) that would not be solved by magnets. though.
Click to expand...

Sorry, just saw this question. I used these magnets and they work great. I used clear packing tape to hole them to a thin aluminum strip, five per side. More per side would be even better but they hold really well. I can pull a strip if you want to show how they work. I tried epoxy but couldn't get them to stay put on the aluminum. The magnets are better for shrinkage because twist locks have no adjustment.

http://www.magnet4less.com/product_info.php?products_id=47&osCsid=18366dfa5ff9c0c3ef466c1ceb865a59
 
myquestoyota said:
Sorry, just saw this question. I used these magnets and they work great. I used clear packing tape to hole them to a thin aluminum strip, five per side. More per side would be even better but they hold really well. I can pull a strip if you want to show how they work. I tried epoxy but couldn't get them to stay put on the aluminum. The magnets are better for shrinkage because twist locks have no adjustment.

http://www.magnet4less.com/product_info.php?products_id=47&osCsid=18366dfa5ff9c0c3ef466c1ceb865a59
Click to expand...

I would definitely like to see pictures of this if you have them.
 
You must log in or register to reply here.

Similar threads

7
What is the sensor on the top of my ‘78 FJ40 Transmission?
Replies
8
Views
226
Living in the Past
Living in the Past
Vossie
De-evolution of my 45- "The Excellent" v3
2
Replies
30
Views
3K
Vossie
Vossie
Cale Anderson
At the edge of sanity with my 40…
2
Replies
31
Views
3K
diesellibrarian
diesellibrarian
Texican
1972 FST FJ40 Garage Find
2
Replies
33
Views
714
peesalot
P

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom