Build Ben3DBuild
- Thread starter BenCC
- Start date
-
- Tags
- build build thread
Member Build Threads
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Ben,
Thanks for adding me as a potential heat tester for the strut safety holders.
After fitting my new deeper cup holders, I found out they are a snug fit for Klean Kanteen insulated food containers. That's a bonus. Coffee up front and food in the centre with Ben's designs.
Thanks for adding me as a potential heat tester for the strut safety holders.
After fitting my new deeper cup holders, I found out they are a snug fit for Klean Kanteen insulated food containers. That's a bonus. Coffee up front and food in the centre with Ben's designs.
Waiting on the pigtail adapters (thanks, @Gbear for the link!). I forget who here shared the tip of the hi-temp polyimide tape, but THANK YOU, pretty excited to try it out and it was a cheap mod. Should be installed next week. Can't say enough about the quality of the mounts, @BenCC , the fit of the RIGID lights was spot on and the finish is great. Cheers!
- Thread starter
- #2,284
Dubai definitely does not need the heated seats
Take a look at Husky liners. I love mine. Thick and rubbery!
Love my Husky liners. Check em' out.
It's getting hot in Texas. I'm in for it!
I’m fast-twitch jumping every time I get an alert on this thread. I’m pooling up current makes with pending makes for a benncc motherlode order for my 2006 LX.
I’m planning on getting the future ashtray delete, ceiling mounted DVD delete combined with the centre console rear-seat DVD control delete and the LX front fog light and, hopefully, turn signal insert.
Along with those I plan to get a scan gauge mount and centre console organizer tray.
There’s probably more but I can’t remember them all right now. I’m feeling really lucky that a 100 series enthusiast is also a Prof. of 3D printing.
Go Ben!
I’m planning on getting the future ashtray delete, ceiling mounted DVD delete combined with the centre console rear-seat DVD control delete and the LX front fog light and, hopefully, turn signal insert.
Along with those I plan to get a scan gauge mount and centre console organizer tray.
There’s probably more but I can’t remember them all right now. I’m feeling really lucky that a 100 series enthusiast is also a Prof. of 3D printing.
Go Ben!
I am interested in checking out Husky liners but I can't find them anywhere for my 2001 Lx470!
Any leads on where to find them? My fall back mats are weathertech liners.
- Thread starter
- #2,290
Thanks haha. I do need to work more on the ashtray delete.
- Joined
- Aug 23, 2007
- Threads
- 114
- Messages
- 1,099
- Location
- Kennett Square, PA
- Website
- cruisin4parts.com
I wanted to get those actually but they were sold out everywhere when I was buying. When these wear out I'll give em a try.
They don't make mats specifically for the LC/LX, but they have a "uni-fit mat" that you can cut to fit:
2009 Toyota Land Cruiser Universal Floor Mats - Husky Liners®
2009 Toyota Land Cruiser Manufacturer of Husky Liners® universal floor mats, custom fit floor mats and more for your truck, car, and SUV.
- Thread starter
- #2,293
Finished the install of the upgraded fog lights yesterday afternoon. Night-and-day (pun intended) difference, these RIGID lights are fantastic and the mount places them in a perfect position. Thanks, @BenCC , slowly but surely these two trucks are coming along, one 3D-printed upgrade at a time! 
- Thread starter
- #2,297
Nice looking!Finished the install of the upgraded fog lights yesterday afternoon. Night-and-day (pun intended) difference, these RIGID lights are fantastic and the mount places them in a perfect position. Thanks, @BenCC , slowly but surely these two trucks are coming along, one 3D-printed upgrade at a time!
View attachment 2622440
View attachment 2622442
A couple years ago, I was searching everywhere for the RHD version of the hazard/CDL switches with no luck. Glad to see you're making them. I always wanted a cell phone mount where the current switches are located.
- Joined
- Jan 4, 2014
- Threads
- 94
- Messages
- 3,042
- Location
- Little Rock, Arkansas
- Website
- www.facebook.com
A pair of covers for their new billet terminals would be a sweet option as wellThis one?
Battery Terminals and extensions - Slee Off Road
Includes 2 x Terminal Extensions 1 x Positive Military Battery Terminal 1 x Negative Military Battery Terminalsleeoffroad.com
SLEE - Billet Battery Terminals - Set - Slee Off Road
Features Securely connect accessory circuits on Group 31 Batteries (Requires Slee Tray Upgrade) Billet machined from Buss Bar aluminum Tin coated for maximum corrosion protection Specifically machined ends to fit Toyota OE battery connections for Land Cruiser 100, 200 & Tacoma (OE ring terminal...
sleeoffroad.com
- Thread starter
- #2,300
Just ordered a set of the cheaper terminals from Slee. They are still on the way. I will do the covers for those first.A pair of covers for their new billet terminals would be a sweet option as well
SLEE - Billet Battery Terminals - Set - Slee Off Road
Features Securely connect accessory circuits on Group 31 Batteries (Requires Slee Tray Upgrade) Billet machined from Buss Bar aluminum Tin coated for maximum corrosion protection Specifically machined ends to fit Toyota OE battery connections for Land Cruiser 100, 200 & Tacoma (OE ring terminal...
View attachment 2622663
Last edited: