Arizona Classifieds / For Sale / Wanted

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I just got myself an 07' GX470. Looks like maintenance was not the previous owners first priority. Looking for trusty land cruiser mechanic out here in the east valley to replace the Timing Belt, Water Pump, and Radiator while it's all apart.

@murf now at Riverview Toyota. Was at Camelback Toyota forever.
 
Sold
Size: 17" x 8"
Bolt pattern: 5x150
Weight: 24 lbs each
They came as factory equipment on the Rock Warrior Toyota Tundra, but also fit Toyota Land Cruiser and Sequoia, as well as Lexus LX470/LX570 with the 5x150 bolt pattern
 
Last edited:
Set of four Rock Warrior Wheels $700 (located in phx but traveling to Tucson next weekend)
Size: 17" x 8"
Bolt pattern: 5x150
Weight: 24 lbs each
They came as factory equipment on the Rock Warrior Toyota Tundra, but also fit Toyota Land Cruiser and Sequoia, as well as Lexus LX470/LX570 with the 5x150 bolt pattern

View attachment 2205529
I will buy these if still available
 
Garmin 57 nuzi GPS 25.00 obo I have 4 got them in a bulk sale
101 and baseline

thumbnail_IMG_0343.webp


thumbnail_IMG_0344.webp
 
Drawer slides.
36” locking 500lb rating (pair)
30” 250lb rating (pair)

I sunk $220 into these in 2017. I was intent on building a single drawer setup with a slide on top, but I’ve come to appreciate the flexibility of the open space without any drawer. I carry my spare onboard so volume is at a premium.

These are high quality slides with nice bearings. I’d like to sell them as a set for $150. Save yourself the shipping and the full retail price, which has increased a bit.

View attachment 2197472

View attachment 2197473
Sold.
 
New dometic CF110.
My fridge died and I found a good deal on a dometic 110. But it wont fit In the truck with the drawer.
I used it for our new years eve party. Been sitting in the garage since.

Looking to trade for smaller dual temp or sell outright.
$900

20200209_171653.webp
20200209_171706.webp
20200209_172131.webp
20200209_172215.webp
 
1997 Toyota Land Cruiser Owner's Manual
I purchased this off of eBay as a reprint. I acquired the original this weekend so it is up for sale. On the plus side, the binding isn't 23 years old so it will hold up a little better. Only real downsides are it isn't in color and isn't original. It contains the same information and page count. The manual does come with a few trail rides under its belt since it rode along in my glovebox. If it doesn't sell here, I'll post it back to eBay.
$60
IMG_2885.webp
IMG_2886.webp
 
1997 Toyota Land Cruiser Owner's Manual
I purchased this off of eBay as a reprint. I acquired the original this weekend so it is up for sale. On the plus side, the binding isn't 23 years old so it will hold up a little better. Only real downsides are it isn't in color and isn't original. It contains the same information and page count. The manual does come with a few trail rides under its belt since it rode along in my glovebox. If it doesn't sell here, I'll post it back to eBay.
$60
View attachment 2207046View attachment 2207045

I have an oem owners manual for a 1996 80 if any body is interested. $55! 😁
 
40 Amp Hour Lithium 12V Battery $400
I bought it from Northern Wind/Solar in the Fall to run some 12V camping gear. Would be a great option for your truck fridge or as an auxiliary 2nd battery (though it is not a drop in truck battery)

battery.webp
 
I'm considering getting smaller tires soon now that I'm using my 80 as a daily. Before I go out and get a set I want to throw it out here if anyone wants to trade up to 315/75 milestar Patagonia m/t 's. They got about 18k miles and have been rotating them every 3k miles with lots of life left. They have lifetime rotation and balancing from discount tire. There are 5 tires.

It's a stretch but I'm looking to trade for 305/70 all terrains. May consider 285's depending on the look. I'd still like to have the wider tire look.

Also, since I lowered my 80 a bit I'll also be selling 1-1/4 inch metal front spacers and 10 mm rear spacers that I used to even out the look. I was running them with medium OME coils.
*Spacers SOLD*

20190609_090553.jpg


20200211_121555.jpg
 
Last edited:
I’d anyone selling a 2” lift for an 80 series? It seems many of the lifts online that say 2” lift the rear like 3”+. I’d like a more level lift.
Thanks.
 
I’d anyone selling a 2” lift for an 80 series? It seems many of the lifts online that say 2” lift the rear like 3”+. I’d like a more level lift.
Thanks.


You can level with this front spacers.
I'll also be selling 1-1/4 inch metal front spacers and 10 mm rear spacers that I used to even out the look.

20200211_121555.jpg
 
I just recently bought some 1st gen Sequoia wheels and I am ready to upgrade to 37s. Is there anyone that would/are looking to downsize from 37x12.5 to 315x75x16? I have a set of 5 KO2. The ones on the truck have 12/32 left of tread and the spare is brand new.

I would be interested in BFG KM3, Goodyear MTR or the Cooper STT Pro. The preferred favorites are the KM3 and the MTR but offer me what you have worst I can say is no.
 
You can level with this front spacers.

I saw those. I really would like to keep the lift under 3”. I may regret that but that’s my plan for now. its odd to me so many kits raise the rear 1”+ more than the front.
 
Last edited:
I saw those. I really would like to keep the lift under 2”. I may regret that but that’s my plan for now. its odd to me so many kits raise the rear 1”+ more than the front.

That is because you can add load to the rear, not the front.
 
Back
Top Bottom