application for clemson mafia

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

You...
 
Need...
 
Those...:doh:
 
Bunch 'o fags...:p
 
You can also multiple quote. Wish more could figure that out. Drives me nuts when guys quote 3 different posts in one.

Also, do you have a fsm or chiltons at a minimum? Your starting to scare me.
 
89s rule said:
Also, do you have a fsm or chiltons at a minimum? Your starting to scare me.
Click to expand...

That's two more requirements down.



section 204 of the Mafia handbook on paper material.

204.5
No paper materials shall be owned by any mafia member except for

1. original handbook that must never be read.
2. Receipts for harbor freight.
3. beer containers containing logos of American beer

204.6
If by some means a mafia member accidentally obtains any other reading material these steps below must be followed.

1. Lie about not having them.
2. If a mafia member is asked for reading materials they are to turn the question around on the person speaking to them. ex. "hey do you have a fj60 fsm?" Mafia response should be "do you have one?" With emphasis on the you. Then revert to rule #1.
3. Cover of said reading material must be ripped off and replaced with the sides of a six pack container of PBR. This should throw anyone off. Please note said container should be empty of beer and laid flat as to not draw attention.
 
lol i have a book and manual on computer.
 
Ahem....I'm a late interloper in this thread so please forgive my dereliction of duties.
P'town ain't fer from Pickens. I have a few 3/4 inch sockets and 3/4 bar and ratchet.
That is if a future Mafia member will touch a Cock's stuff.
:grinpimp:
Still have my Clemson Mafia sticker collection.....just never put one on Gundy
out of respect for the Family.
:flipoff2:
 
Gundy said:
Ahem....I'm a late interloper in this thread so please forgive my dereliction of duties.
P'town ain't fer from Pickens. I have a few 3/4 inch sockets and 3/4 bar and ratchet.
That is if a future Mafia member will touch a ****'s stuff.
:grinpimp:
Still have my Clemson Mafia sticker collection.....just never put one on Gundy
out of respect for the Family.
************
Click to expand...

i may take u up on that. I am waiting on a new spring pin from sor and once the driver side is reinstalled i will tackle the passenger side. I have been spraying with pb blaster for days now so it should come off easier.
 
the gimpey one said:
i may take u up on that. I am waiting on a new spring pin from sor and once the driver side is reinstalled i will tackle the passenger side. I have been spraying with pb blaster for days now so it should come off easier.
Click to expand...

Just let me know Pal!
 
Go find some small hills and flex the hell out of it a few times...I changed a friends 62 springs(never off road) and I had to cut off most of the spring pins. On mine (After wheeling alot) they come right out...just saying...
 
Saw this today. Seems like someone should be using this to hold their truck together.
ducttape.webp
 
You must log in or register to reply here.

Similar threads

Krondor
Looking for help with a Holley Sniper Autolite 1100
Replies
11
Views
811
Krondor
Krondor
W
Looking for OEM FJ40 wheels
Replies
0
Views
567
wildcatter 264
W

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom