application for clemson mafia

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Whoops,
7. If they think shocks are optional parts.
 
Got a stubborn bolt i am gonna have to grind off it looks like. I don't have a 13/16ths impact socket and not man enough to break it with a wrench. Gonna have to borrow a grinder. Something i still gotta buy.
 
You can't work on a Cruiser without a cheater bar and/or an impact wrench. Just grab a pipe and it'll break free. Leverage is always your friend.

Jeremy
 
BELMONT148 said:
You can't work on a Cruiser without a cheater bar and/or an impact wrench. Just grab a pipe and it'll break free. Leverage is always your friend.

Jeremy
Click to expand...

Unless your working with a 3/8 drive. Which something tells me he is. I don't think the Mafia is allowed to own 1/2" drives.
 
Removing ubolt nuts with a 3/8" ratchet is funny. You mean something like this.:lol::lol:

Jeremy
user74830_pic8440_1247541007.webp
 
not sure what size impact it is. Guessing 3/8 it was a christmas present. kobalt set. Simply at a bad angle as well.
 
Trollhole said:
Unless your working with a 3/8 drive. Which something tells me he is. I don't think the Mafia is allowed to own 1/2" drives.
Click to expand...

i do own a 1/2" drive ratchet but not a socket that fits.:bang:
 
Is that a Trollhole carb? If so where did you get the air filter. Putting mine in the 40 and not sure my air filter will work. I also need to get the size on the fuel input. I need to put a threaded barb on that so I can hook up a soft fuel line.
 
k&n airfilter off ebay. Had to run an adapter under it due to seller sending me the wrong size. I can't find the info but k&n has one that will fit it. I think the neck is 3 1/16"
 
scott johnson said:
Is that a Trollhole carb? If so where did you get the air filter. Putting mine in the 40 and not sure my air filter will work. I also need to get the size on the fuel input. I need to put a threaded barb on that so I can hook up a soft fuel line.
Click to expand...

Your air filter will work with a few little mods.

You can cut a section of the old fuel line and use it as a barb. Just use a hose clamp.
 
well marshall i just sealed the deal for mafia membership. No one told me this pin came off as one piece. That is the one i took the grinder too!!!Not even gonna post a pic of the nic i put in the springs with the grinder by accident.:crybaby:
003.webp
 
specter has a greaseable pin that looks just like it but it is listed as for a 40. Anyone know if it is the same thing???
 
nevermind figured it out
 
You know it's possible to put more than one sentence in a single post, right? Seems like you're having a conversation with yourself.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom