Anyone have leftover torsion bars and/or springs?

[SoCal Dan]

I have an LX with AHC, and I'm looking to convert to the standard LC suspension.

I'm looking for any/all of the following, but particularly looking for LC torsion bars and/or springs.

torsion bar (right): 4816160030
torsion bar (left): 4816260030
rear right spring: 482316A660
rear left spring: 482316A670
rear spring damper (aka “bumper”): 4831360010 (need 2)
rear spring spacer: 4837360010 (need 2)
rear spring insulator: 4825760020 (need 2)

Thanks!

 

[SoCal_80]

I am lifting my 06 LC in the next week or two. Will have the torsion bars and rear springs then. 93k on them

 

[bucfl]

I have the rear springs of a 2001 LC with 200k miles when I removed them. I'm not trying to stop you but the OME 2865's are like $180.

Mine are shot and would require spacers to keep them from bottoming out.

 

[bushdoctor]

I have OME medium load. Used for about 5k miles and went on to the heavies after adding heavier gear. I wouldn't mind selling them

 

[abuck99]

You are welcome to mine- off a 2005 LC non-AHC. Just pay the shipping.

 

[TheForger]

I have a pair as well off a 2000 LC. They have ~185k on them

 

[SoCal Dan]

Thanks folks. I don't want to do a lift because my parents use the truck when they're in town and it's high enough as is. Just getting the ride acceptable would be fantastic at this point. I think I'm good on TBs and springs but if anyone has the dampers, spacers, and/or insulators I'm interested if they're in decent shape.

 

[Newps]

I've got a set of stock torsion bars, not 100% sure on the rear springs but I have to imagine I have them too.

 

[Dannyboy lx470]

Do need to use dampers and spacers and insulators from a lc for them lx one's no good.

 

[SoCal Dan]

Do need to use dampers and spacers and insulators from a lc for them lx one's no good.

Yeah I think the guys who lift their LCs reuse the stock dampers, spacers, and insulators. But if anyone has some stock ones they don't need, I'm interested.