For Sale 91 Toyota Land Cruiser w/1HDT and 5 Speed (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Location
United States
Sold

13592250_10153230976032185_8720208575457916719_n.jpg


13419162_10153188445847185_3804253270440656469_n.jpg


13240006_10153188446232185_993446364793079883_n.jpg


13435446_10153188446172185_7074985811935564297_n.jpg


13445539_10153188446197185_6807589900561383754_n.jpg
 
Last edited:
How much with bumpers and shocks?
 
Any more interior pics? Also, is there anything that doesn't work on it? Could a buyer drive it 5000 miles to get it home?
 
Maybe you missed my last post, I'm interested. Do you have any more pictures of the interior, especially the 2nd and 3rd (does it have one) row? Also, are there any driveability problems with this vehicle? Have all the little things been figured out with the swap, or are there still a few nagging things that need attention?
 
Maybe you missed my last post, I'm interested. Do you have any more pictures of the interior, especially the 2nd and 3rd (does it have one) row? Also, are there any driveability problems with this vehicle? Have all the little things been figured out with the swap, or are there still a few nagging things that need attention?

Sorry I've been getting a lot of interest, and don't know who's who.

Full interior with 2nd and 3rd row.

Vehicle starts and drives without any issues. Has a slight 3rd gear grind, and will add the friction modifier.

I need to hook up the mic for the bluetooth as I wired it wrong.

Also the sunroof is leaking and needs the drains cleared out. Found out when we had our once in a lifetime rain in CA because prior to that we where in a drought.
 
Last edited:
i can include my spare parts since I'm not needing my 80 parts.

spare transfer case that is 2H, 4H and 4L selectable. This is a part time transfer case. Also have a brand new out of box Panasonic rear seat entertainment system I can throw in.
 
wow! nice 80
 
Can you explain your comment about the 3rd gear grind and 'friction modifier'?
Can you give any more details about the source/history of the motor?
 
Sorry for the late response, as I've been busy.

1. I replaced the transfer case about 6 months ago and the shop used a cheap transmission fluid.
2. Trans will do a light grind in the morning so I want to add the proper fluids that may or may not have a syncromesh additive

I should have the fluid swapped out within the next few weeks when I have time.
 
that is an awesome rig! was it imported?
 

Users who are viewing this thread

Back
Top Bottom