Dunno if it has lockers, but the ad is quite entertaining. And sad.
http://shreveport.craigslist.org/cto/4523579610.html
http://shreveport.craigslist.org/cto/4523579610.html
80 Series General Tech and Classifieds
- Thread starter MEMCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
1993 Toyota FZJ80 Land Cruiser
-225k miles
-factory front & rear lockers
New parts (last 2 months)
-OME 2.5” Suspension lift (heavy/heavy) shocks, springs, steering stabilizer
-Metal Tech 1.5” front coil spacer (custom metal spacers)
-Metal Tech 2” front swaybar link drop brackets (aluminum)
-Pioneer Bluetooth digital media receiver
-front and rear 5 ¼” door speakers
-rear lift gate shocks
-CDL switch mod
-Metal Tech front winch bumper
-Valve cover gasket
-Spark plug wire gaskets
-Spark plugs
-Oil & filter change
-Windshield wipers
-315/75/16 Cordovan Mud Claw tires
-4 factory Toyota center caps
-EGR delete
-catalytic converter delete
-a/c idler pulley, a/c charge, and converted to R134
-fender flares removed
-speed sensor o-ring replaced
What I would do next:
-power steering hose or pump leaks some
-clear coat is peeling on the hood and roof
-power door locks don’t work and I haven’t looked into it yet
Great truck that I would drive to Alaska in today! Ton of new parts and probably some more stuff I can’t recall. I'm anal about maintenance and having my stuff done right. 1993 FSM included with sale.
I wanted to offer it here for a few days before Craigslist.
$7500 obo (near Flora, MS) probably best to contact me at bmc7942 at hotmail dot com
-225k miles
-factory front & rear lockers
New parts (last 2 months)
-OME 2.5” Suspension lift (heavy/heavy) shocks, springs, steering stabilizer
-Metal Tech 1.5” front coil spacer (custom metal spacers)
-Metal Tech 2” front swaybar link drop brackets (aluminum)
-Pioneer Bluetooth digital media receiver
-front and rear 5 ¼” door speakers
-rear lift gate shocks
-CDL switch mod
-Metal Tech front winch bumper
-Valve cover gasket
-Spark plug wire gaskets
-Spark plugs
-Oil & filter change
-Windshield wipers
-315/75/16 Cordovan Mud Claw tires
-4 factory Toyota center caps
-EGR delete
-catalytic converter delete
-a/c idler pulley, a/c charge, and converted to R134
-fender flares removed
-speed sensor o-ring replaced
What I would do next:
-power steering hose or pump leaks some
-clear coat is peeling on the hood and roof
-power door locks don’t work and I haven’t looked into it yet
Great truck that I would drive to Alaska in today! Ton of new parts and probably some more stuff I can’t recall. I'm anal about maintenance and having my stuff done right. 1993 FSM included with sale.
I wanted to offer it here for a few days before Craigslist.
$7500 obo (near Flora, MS) probably best to contact me at bmc7942 at hotmail dot com
Someone found a spot sorting out the new rig today! Had a rear locker not engaging, got it solved with a little help from Paul Kegley.
Bodean
Hot Damn
What rear bumper is that? We were looking at it at the meeting and couldn't figure it out. 4x4 Labs?
Bumper and sliders are from bump it offroad in Greely, CO.
All it needs now is and ice chest rack.
It's an 80... you need a fridge!
Never gets old
New muffler, 7pin mod, and one of these
This weekend
This weekend
Bodean
Hot Damn
Nice Dan!
Anybody around JXN have a spare Old Man Emu steering stablizer pin/bolt laying around? Long story short I order one from Amazon. I get it, box is beat to hell and back, stabilizer is scratched up, and looks like its not used, but has been abused in handling and maybe retured prior. It only has one of the mounting bolts. I email amazon and they tell me to just keep it and they will refund my money. So now I am looking for a pin thing'a'ma'jig. I had the original stabilizer on and ordered the lift, but had to order the stabilizer seperate because they were back ordered.