40 to 45 build thread?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 18, 2010
Threads
4
Messages
141
Location
Butte City, Ca
IMG_0364.webp
Does anyone know if there is a build thread on this truck?
 
It was advertised in the classified section last fall. He may have had a link to his build thread in the ad.
 
All I know is it is totally rad. Wow, I hope you find a link and post it up in here.
 
I think that was @taterhead rig, fully dressed for the ACT with @HENDOG riding shotgun.
 
Yes, it was mine. Started as a 77 fj40. Cut at the seam behind the doors and extended it about 12 inches to create the cab. Frame was extended around 32 inches and shortened a j45 bed that was rotted out. we used the rear quarters from the fj40 and used them for the rear of the bed. Added a 5.3, th400 and atlas. Built the top bows out of conduit and had a local shop cover the top. Rear suspension was a quarter elliptical set up, Toyota axles with 5.29's and ARB f/r. Everything worked well on our ACT trip. Sold the truck to a guy in Texas. I imported a 4door Bandeirante that sits in my garage....One day I'll trick it out as well. Thanks for the Interest.

IMG_1306.webp


IMG_1351.webp


IMG_1384.webp
 
Yes, it was mine. Started as a 77 fj40. Cut at the seam behind the doors and extended it about 12 inches to create the cab. Frame was extended around 32 inches and shortened a j45 bed that was rotted out. we used the rear quarters from the fj40 and used them for the rear of the bed. Added a 5.3, th400 and atlas. Built the top bows out of conduit and had a local shop cover the top. Rear suspension was a quarter elliptical set up, Toyota axles with 5.29's and ARB f/r. Everything worked well on our ACT trip. Sold the truck to a guy in Texas. I imported a 4door Bandeirante that sits in my garage....One day I'll trick it out as well. Thanks for the Interest.

View attachment 1474968

View attachment 1474969

View attachment 1474974

Thanks so much for the response. I saw the ad right after it sold needless to say I was heart broken. This is the nicest looking "45ish rig I have seen. I will build one soon. Thanks again
 
Amazing work! Love it

x2 for more pics
 
Here are a few more. The rack was pretty tall on the ACT trip, but we had a good bit offer. Once I got it home I cut the top level off so the rtf was close to the same height as the soft top. OH yeah, the top came off as one unit.. frame and material. Second pic was in Alaska, bottomless moss pit. and the last pic was how all vehicles were taken to Alaska. Thanks to Roger Theurer.

IMG_0761.webp


IMG_0648.webp


IMG_1382.webp
 
Couple more, Wish I had some of the build. Thanks to my brother for setting up the suspension, cutting and turning of the axle and four like the rear. Truck would drive down the road 70 mph without a problem. Also racing on the Denali Hwy. And last pic is of my friend @HENDOG napping while on our trip to the glacier.
Also, I shipped truck to pismo beach for the 10th annual SNT. Did not have the 5.3 conversion at the time but still had a blast.

IMG_0767.webp


IMG_0113.webp
 
What size tire were you running on those MTR's? So, you were spring over with 1/4 elliptical and 4 link rear?
 
Yes, it was mine. Started as a 77 fj40. Cut at the seam behind the doors and extended it about 12 inches to create the cab. Frame was extended around 32 inches and shortened a j45 bed that was rotted out. we used the rear quarters from the fj40 and used them for the rear of the bed. Added a 5.3, th400 and atlas. Built the top bows out of conduit and had a local shop cover the top. Rear suspension was a quarter elliptical set up, Toyota axles with 5.29's and ARB f/r. Everything worked well on our ACT trip. Sold the truck to a guy in Texas. I imported a 4door Bandeirante that sits in my garage....One day I'll trick it out as well. Thanks for the Interest.

View attachment 1474968

View attachment 1474969

View attachment 1474974
 
Back
Top Bottom