2F Valve Cover bling.....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 1, 2006
Threads
447
Messages
1,858
Location
Dallas
Website
www.octagonmma.com
Raining and cold and everyone's out shopping. I brought the valve cover from my 2F with me to the inlaws' for polishing if I got bored. Well, after some 400 grit and aluminum polish, it looks pretty good. I'll probably buff it to a mirror polish on the wheels in our shop, but I am pleased with the satin look a hand polishing results in.....

PB240875.jpg


PB240874.jpg


PB240871.jpg


PB240870.jpg


PB240867.jpg
 
Last edited:
My shoulder is starting to hurt if that's any indication. I did all the sanding by hand and the polish was applied by hand and then buffed off with a clean towel. You just have to keep after it. This took maybe 3 hours? Usually I would just buff on the machines we have but at 40F outside the cutting polish starts to smear around and won't really work. Originally the oxidation was dark grey and nothing cut through it. I loaded the buffer with fine green polish and tried a corner. It came out like a mirror. Unfortunately this corner wasn't very bad and the rest was. I'd say start with 400 sandpaper then try a bit finer say 600 paper or liquid polish with a buffer, then use a polishing wheel with green polish. For the next fifteen minutes admire your work. Reinstall and plan on polishing it again in the future. Aluminum is difficult to work with when it is heavily oxidized. My recommendation is take your time. Wash the cover in between steps with Dawn dishwashing liquid to remove grit and dust.
 
You can save the sandpaper chore by starting off with a good brushing using a solid end 3/4" .006 wire dia. drill-powered wirebrush and spin it about 20K.....it'll bring it to the state where a slight buffing will be all thats needed.....
 
I like it ,and I think I'll get the wife to do it to her 40. That will be the day!!!!!!
 
Just a tip for anyone polishing aluminum. When I use to have a semi and polished the wheels regularly, I would keep a jar (use to use a small glass folgers jar with the metal lids and poked holes in the lid) filled whith regular old flour and when you get a bunch of the black stuff built up from polishing, take and sprinkle the flour on a clean part of a towel and that black stuff will wipe right off and really pull the shine out more than just trying to wipe it off.
 
Alex, have it clear powdercoated. The first drop of antifreeze will stain it. If you paint it without etching.....as I did, it will peel right off in sheets. I bead blasted mine, etched it(which darkens it) and cleared it with catalized urethane. If you don't coat it with something it will oxidize and/or stain:frown:

Old pic.....posted many times, and yes, it is in the truck for about 15 months now:flipoff2:

Ed
motivator7f952f62bb69736f71ff3f04a99c0709.webp
 
I love that poster! WTF is clear powdercoating?
 
Well, they can powdercoat in most any color.....clear being one of the "colors"
I don't think you need to etch to get powdercoating to stick whereas you do need to etch to get paint to stick. Make sense?

Several guys here on the board have tha capability to powdercoat smallish parts.
Limiting factor is the size of oven they have access to. Trollhole is one:cool:

Ed
 
might as well powder-coat it chrome........
 
Alex, have it clear powdercoated. The first drop of antifreeze will stain it. If you paint it without etching.....as I did, it will peel right off in sheets. I bead blasted mine, etched it(which darkens it) and cleared it with catalized urethane. If you don't coat it with something it will oxidize and/or stain:frown:

Old pic.....posted many times, and yes, it is in the truck for about 15 months now:flipoff2:

Ed
Wish this thread was a week earlier. Just cleaned mine up with scotch pads and steel wool, many hours of work, then coated with clear laquer no etch. Hope mine doesn't peel.
 
Alex, have it clear powdercoated. The first drop of antifreeze will stain it. If you paint it without etching.....as I did, it will peel right off in sheets. I bead blasted mine, etched it(which darkens it) and cleared it with catalized urethane. If you don't coat it with something it will oxidize and/or stain:frown:

Old pic.....posted many times, and yes, it is in the truck for about 15 months now:flipoff2:

Ed

Ed, just what type of fan is that? Seen that pic many times but just now noticed the raised fins on the blades. Middle eastern version? ;)
 
You can save the sandpaper chore by starting off with a good brushing using a solid end 3/4" .006 wire diameter. drill-powered wire brush and spin it about 20K.....it'll bring it to the state where a slight buffing will be all thats needed.....

Hey Grant, where might one get such a high speed wire wheel? Are you using a die grinder to spin it?
I have already started with the sandpaper and it sucks.

Also I have tried powder coating things chrome, and while they look good, there is no comparison to highly polished aluminum with clear coat. Clear coat powder sticks to bare polished aluminum just fine!
 
Ed, just what type of fan is that? Seen that pic many times but just now noticed the raised fins on the blades. Middle eastern version? ;)

The vanes give me extra lift for STOL;)

Actually I think it is off of a later FJ60.

Glad to hear the clear PC will stick to un-etched aluminum.


Ed
 
Ed, just what type of fan is that? Seen that pic many times but just now noticed the raised fins on the blades. Middle eastern version? ;)

Man-A-Fre sells an aftermarket fan that looks identical to that one. I have one on my '78.
 
Hey Grant, where might one get such a high speed wire wheel? Are you using a die grinder to spin it?

The only source that I've found so far with that small of a brissle---> http://buy1.snapon.com/catalog/item...0&group_ID=905&store=snapon-store&dir=catalog ... it takes one per cover... if you spin em more than 20K the lil wires start to fly..... the wife gets pissed when I wash my work shirts with the rascals stuck in them and the brissles let get go in the washing machine then on the next load they get hung-up in her bras....:mad:
 
Back
Top Bottom