2f fail

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

did stuff

but not too much...because i was thinking about how UNBELIEVABLY AWESOME it would be if i had one of these....

A nice lady that loves grass.
snorkal.webp
sam_0360.webp
sam_0369.webp
 
but not too much...because i was thinking about how UNBELIEVABLY AWESOME it would be if i had one of these....

A nice lady that loves grass.

William Jefferson sayz:
l_b19e83e335a74efbb448776ade9e5455.webp
 
Gas, Grass, or Ass (with teeth?)

Ha! Tools...that picture is great!

lol...no teeth missing...must be trick photography!

The gears aren't meshed yet and the two "missing teeth" are hiding in the flash shadow of the crank gear.

Too nice looking for WJC to hit, maybe it was site of the mobile home that made dream of Arkansas

Ha!..now you are talking....see we always manage to come around to missing teeth, mobile homes, and...well...I love this forum....:cheers:
 
Wow - a LeSharo

but not too much...because i was thinking about how UNBELIEVABLY AWESOME it would be if i had one of these....

A nice lady that loves grass.


Very rare to see one on top of a hill. Only vehicle I've ever owned that was worse on grade than my FJ60.

:)

Glenn
 


Very rare to see one on top of a hill. Only vehicle I've ever owned that was worse on grade than my FJ60.

:)

Glenn

So, you're saying, that girl can't climb? She looks to have a pretty health set of lungs?:confused:
 
So, you're saying, that girl can't climb? She looks to have a pretty health set of lungs?:confused:
Duh,,,,,,,,,,,,,,,,,,,,,are ya sure that her LUNGS yur lookin at there, buddy??
 
Staked the oil squirter and contemplated my bung

I didn't do very much here....positioned and staked the oil squirter. I also took a look at my oil pan bung and contemplated adding some metal to it. I did manage to sweat my ass off for the 15 minutes I was in the garage.

Oh I also went and got honey a new toy. She agreed to trade her old Mustang for a new one. Her yellow one didn't match my blue house and blue Cruiser color scheme. It was time to put old yellow down. Honey is happy as a clam. :clap:
sam_0378.webp
sam_0399.webp
sam_0402.webp
 
I didn't do very much here....positioned and staked the oil squirter. I also took a look at my oil pan bung and contemplated adding some metal to it. I did manage to sweat my ass off for the 15 minutes I was in the garage.

Oh I also went and got honey a new toy. She agreed to trade her old Mustang for a new one. Her yellow one didn't match my blue house and blue Cruiser color scheme. It was time to put old yellow down. Honey is happy as a clam. :clap:

It has been happening at the OB1 crib lately - new motor, new ring, new car what is next:hhmm: A Baby:eek::idea::flipoff2:
 
Did stuff

Well...I fixed the problem with my oil pan by welding a drop on the low spot and grinding it down. The three drops to the left of the hole were to dial in my welder settings so I got what i wanted.
sam_0424.webp
sam_0427.webp
 
then more

I double checked the torque on the connecting rods and mains. Next was to put the oil pump on. Then a new toyota corky, and buttoned up the bottom end.
sam_0428.webp
sam_0437.webp
 
Mke, it looks like your making good progress :cheers:


I see Ford brought back the baby blue for the Mustang. My neighbors 1973 Mustang convertible is the same color.

Too bad it sits there collecting cobwebs.....
 
rocker shaft

So..I don't know what life would be like without a R O C K E R S H A F T.......


Smoke that s***!
sam_0504.webp
sam_0498.webp
sam_0505.webp
 
more detail

fawked up now....u can't forget the engine lift brackets...doH!

aLSO ...when you rip apart the rocker...you better have a pattern. That is the hardest part of a 2f.

BTW,,,thanks to Henry for the sweet big ASS CHAIN!!! (I'll get it back to you, brother...:)

:cheers::cheers::cheers::cheers::cheers:
sam_0500.webp
sam_0510.webp
sam_0516.webp
 
Back
Top Bottom