$1k For Engine Install?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 8, 2017
Threads
61
Messages
398
Location
Oneida, TN
Hey everyone!

The shop rebuilding my 4.5L has offered to reinstall it for $1k. I removed the engine, all bags are labeled, hardware cleaned, and sensors are mapped to the block. So it would be pretty easy.

Originally I wanted to do this for learning opportunity, but for warranty reasons I think it would be a good investment. They offer 12 month unlimited mileage warranty.

I would also buy a few new items, like a starter, water pump, etc.

What do you all think? Would this be worth it?
 
Last time i checked it was around 1k for a put and pull. That said it is harder to do the job when someone else has done the disassembly and i haven't asked recently. I also know that I price things based on jobs i want to do. Rarely turn someone down but will often price something i don't want to do at a premium. Best guess would be to get on the phone and get a few more quotes. Time is money and everyone has a different value on time.
 
What’s your time worth to you and can you afford $1000? I think that’s really all it comes down to. There are times in my life $1000 would be great just so I didn’t have to deal with it and times when I couldn’t imagine paying $1000, but the amount of work didn’t change just what it was worth to me.

If the shop does great work and you trust them and you can afford it, I don’t see anything wrong with $1000.
 
The biggest factor is if you trust their work. I have hard time even trusting shops on simple things. Had issue with local shop installing belts! Had to tighten it myself after 2 trips, would been cheaper and 1/4 of time had i just followed the belt thread and did it myself. And engine pull is MUCH more complicated than belts so I would research shops really carefully.
 
Thanks. This shop is rebuilding my engine, so I guess I better trust them, right? Like I said, the warranty is a big part of this...if something happens, I want them to have to pull/fix/reinstall, not me. Based on you guys, I think I'll pull the trigger :)
 
What’s your time worth to you and can you afford $1000? I think that’s really all it comes down to. There are times in my life $1000 would be great just so I didn’t have to deal with it and times when I couldn’t imagine paying $1000, but the amount of work didn’t change just what it was worth to me.

If the shop does great work and you trust them and you can afford it, I don’t see anything wrong with $1000.

Truth.
 
If you're even considering, do it.

Usual disclaimers, like if the shop has ever mentioned your "V6" or "timing belt" - thank them for the offer & pass.
 
1,000 seems really fair to me especially if you can have eyes on the rebuild job as it moves along all the way to finished and running. You’ll know by talking to the guy doing the work thus far if he’s good, likes his work, experienced, familiar with your model.
 
How much is the engine rebuild? Just curious.

I just had one built and it was right at 3k. I bought all factory gaskets, used arp head studs and went one size over on pistons. Without new pistons and the bore it would have been a good bit less. I know prices vary by region but just thought I would share.
 
I just had one built and it was right at 3k. I bought all factory gaskets, used arp head studs and went one size over on pistons. Without new pistons and the bore it would have been a good bit less. I know prices vary by region but just thought I would share.
Dang. At that price, I might consider just having one done for safekeeping or if I saw a truck with a bad motor come across the airwaves. Did that include all the stuff you bought or was that just the labor?
 
Is 1000 dollars to do this job reasonable, only you can decide what your time is worth. As for me, peace of mine in doing this type of job is everything, so if i want the job done to my satisfaction, I'd do it myself, otherwise pay the man the money.
 
Dang. At that price, I might consider just having one done for safekeeping or if I saw a truck with a bad motor come across the airwaves. Did that include all the stuff you bought or was that just the labor?

That was me taking them a bad long block and picking up. Rebuilt long block. They had to turn the crank also. It's from a very good local shop that does a bunch of engine work. The guy was finishing up a Nissan 4.2 TB engine from a forklift. They have done several 1fz forklifts also.

I have a couple spare 1fz long blocks that need rebuilding if you are in the market.
 
Thanks. Was 3k the cost for someone else to do it or yourself?

I'm thinking of buying a used motor and rebuilding it myself. Or having it done, haven't decided.
 
Thanks. This shop is rebuilding my engine, so I guess I better trust them, right? Like I said, the warranty is a big part of this...if something happens, I want them to have to pull/fix/reinstall, not me. Based on you guys, I think I'll pull the trigger :)


If that’s He case the 1k is no brainer.
 
Seems a reasonable price... At this particular point in my life, I’d gladly pay it. Twenty years ago? Not so much. The value of time and money varies.
 
For that $1k you can buy a lot of “while you are in there” parts like all hoses that carry fluids, ignition parts, motor isolators, brand new wire harness, PS pump rebuild, vacuum hoses, etc. I realize that this list adds up to greater than $1k. Take your pick.

Have you bench tested the temp sensors, vsv’s, tvv, vacuum modulator, egr valve? Have you cleaned the throttle body up? It has some tiny passages.

You will drive your 80 with greater pride and confidence knowing you did the install yourself.
 
Back
Top Bottom