Hello everyone,
I took my 2002 LX470 to the shop last week to replace the CV axles as they were worn-out.
After replacing with TRAKMOTIVE from Rockauto.com, a strong vibration started.
The shop mounted NAPA ones, same thing, rebuild and balanced the front shaft, still there. Removed the...
2003 LC, 193000 miles — Recently installed an Old Man Emu 2” lift kit, new method wheels and Mickey Thompson Baja Boss A/T’s 285/70/17. When stepping on the accelerating, basically to get into passing gear, the front end vibrates and the truck feels like it doesn’t want to kick in the necessary...
1980 FJ40, 4 on the floor -
I get crazy high amounts of vibration at the high end of 3rd gear and into the start of the 4th - once I get wide open into 4th it clears out.
This has been an issue for a while but it seems like it's getting worse and shaking everything inside the truck really...
How do you measure bent rims or axles? What would be a limit?
Picture is of one wheel measured at the outside edge of the wheel.
Still chasing a vibration at around 65mph
Bearings are good, but will probably check em again. Also drive shafts are balanced.
Thanks
So there I was minding my own business on I-70 near Vail, CO at about 70mph and feeling a funny vibration that kinda went away at lower speeds. Now this funky feeling started in Cedar City UT a day earlier after hitting a weird very tall steep side walk / curb entrance to the Starbucks parking...
Hey guys, my son told me his LX was shaking at around 40 mph and it was due for an oil change and tire rotation so I figured I would have them look at it. Of course, kids don't always tell you exactly what is going on.
Driving to the shop this morning their is a slight vibration while driving...
Hi I bought a used 2005 LX470. It was not in a good shape. So, I performed the following works on it:
Front:
New Axles and hub flanges
New globes for AHC
New differential (yeah it was noisy and leaking) along with its bushing
Tires Balancing job done recently
Drive shaft lubricated with grease...
Hi All - I have an issue that the dealer can't figure out on a brand new 2023 4Runner (<2k miles).
There is an intermittent gas pedal vibration/sensation when moving the steering wheel (even the slightest). The problem is that this issue comes and goes and the dealer is having trouble...
Hi all! Currently having vibration/shaking issues with my FJ62. The vibrations happen when I accelerate to 20 mph and feel as though I am driving on a gravel road. When I let off the gas and cruise, the issue seems to go away until I step on the gas again. I'm also unsure that it is shifting...
6 hours into a 12 hour trip, towing a 2,600 lb. travel trailer. I heard and felt a bang, much like a driveshaft thump or hard shift, but much harder. A few seconds later I felt a vibration and started to pull over. As I did both front tires locked up into a skid. The trans shifted fine, and...
I'm looking to buy a 13 LX570 with what seems to be a braking issue.
Whenever the brake pedal is pressed while the truck is moving there is vibration/shudder throughout the entire truck and steering wheel. the sensation is almost like the calipers are clamping then letting go in quick order...
I just returned from a ~1,500 mile round trip and fought this issue nearly the entire time. I'm getting a strange rumble or vibration when the gas pedal is at a very specific position. It almost feels like running over shoulder rumble strips, but not quite as extreme. It's a full car vibration...
I’ve put off writing this thread for months, because I believed the answer was already out there. But after 100+ hours of research/wrenching/losing sleep, here we are. ’09 LX, 169k miles. Southern car, no rust. Family daily driver, state camping machine, and occasional 4x4 roads in remote NM...
So I have been feeling a super subtle vibe when letting off the gas going down hill over 100kmh. it is very subtle like running over a patch of ruff road. I though it was maybe bad u joint and took the shaft off t check and found that there is a tiny amount of movement between the pinion flange...
Hi,
tried to found some info online but wasn't able to found anything related to my issue. Bought a 3b/h55f combo from a hj70, engine as been rebuilt, clutch is new and flywheel as been resurfaced. Everything works well beside a grinding and vibration on 3rd gear. I'm aware that the 3rd synchro...
I recently picked up a stock '18 GX460 w/ 35k mileage and clean carfax. I feel that it rides as it should and I don't really notice from looking at it or during the drive the infamous "KDSS lean".
It maybe happens twice a week? but I notice that when I have my foot on the brake whether it'd be...
Hi there, I have a GCC spec 2007 LX470 with a conventional LC100 suspension set up (AHC was cancelled). It's been a good long while since the AHC delete and the ride was very smooth but for the past couple of months the car has been very harsh on even the tiniest road imperfections. Even in...
2005 GX470 80k miles
On a recent trip I noticed a vibration while accelerating at speed. At around 55 mph and up, while accelerating OR applying power to maintain speed I feel a mild vibration similar to tire unbalance. As soon as I let off it goes away.
Just had the tires balanced before the...
My 1988 FJ62 makes a very rough vibrating feeling and loud vibrating sound. It does not happen often but when it does it feels and sounds like you are running over rumble strips on the side of the road. And it sounds like it is mechanical that is either behind the dash or under the floorboard...